From: Brian Norris <[email protected]>
A flash may support N read retry voltage threshold modes, numbered 1
through N-1 (where mode 0 represents the initial state). However,
nand_do_read_ops() tries to use mode 0 through N.
This off-by-one error shows up, for instance, when using nanddump, and
we have cycled through available modes:
nand: setting READ RETRY mode 0
nand: setting READ RETRY mode 1
nand: setting READ RETRY mode 2
nand: setting READ RETRY mode 3
nand: setting READ RETRY mode 4
nand: setting READ RETRY mode 5
nand: setting READ RETRY mode 6
nand: setting READ RETRY mode 7
nand: setting READ RETRY mode 8
libmtd: error!: cannot read 8192 bytes from mtd0 (eraseblock 20, offset 0)
error 22 (Invalid argument)
nanddump: error!: mtd_read
Tested on Micron MT29F64G08CBCBBH1, with 8 retry modes.
Signed-off-by: Brian Norris <[email protected]>
Acked-by: Huang Shijie <[email protected]>
---
drivers/mtd/nand/nand_base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 59eba5d..9715a7b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1584,7 +1584,7 @@ read_retry:
}
if (mtd->ecc_stats.failed - ecc_failures) {
- if (retry_mode + 1 <= chip->read_retries) {
+ if (retry_mode + 1 < chip->read_retries) {
retry_mode++;
ret = nand_setup_read_retry(mtd,
retry_mode);
--
1.7.9.5
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
