Hi Maxime,
El 28/02/14 13:37, Maxime Ripard escribió:
In order for the DMA controller to work for SDRAM to devices transfers, the AHB
clock should be reparented on the PLL6.
Force that parenting in the clock driver.
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/clk/sunxi/clk-sunxi.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index f6f61cc..a5c5882 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1286,7 +1286,7 @@ static void __init of_sunxi_table_clock_setup(const
struct of_device_id *clk_mat
*/
static void __init sunxi_clock_protect(void)
{
- struct clk *clk;
+ struct clk *clk, *parent;
/* memory bus clock - sun5i+ */
clk = clk_get(NULL, "mbus");
@@ -1307,6 +1307,22 @@ static void __init sunxi_clock_protect(void)
if (!IS_ERR(clk))
clk_prepare_enable(clk);
+ clk = clk_get(NULL, "ahb1_mux");
+ if (IS_ERR(clk)) {
+ pr_err("Couldn't get AHB1 Mux\n");
+ return;
+ }
+
+ parent = clk_get(NULL, "pll6");
+ if (IS_ERR(clk)) {
+ pr_err("Couldn't get PLL6\n");
+ return;
+ }
Remember this runs on every sunxi, but this bit of magic is sun6i only.
We'll get bogus messages on the other platforms if this goes as is. You
could do something like the following:
> + clk = clk_get(NULL, "ahb1_mux");
> + parent = clk_get(NULL, "pll6");
> + if (!IS_ERR(clk) && !IS_ERR(parent))
> + clk_set_parent(...)
If these things become more common, we may need to consider a
per-platform fixup function or something.
Cheers,
Emilio
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
