Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Hans de Goede <[email protected]>
---
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 27 ++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 3c9f8b3..23611b7 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "sun5i-a10s.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
/ {
model = "Olimex A10s-Olinuxino Micro";
@@ -34,6 +35,19 @@
};
};
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PE3";
@@ -41,6 +55,13 @@
allwinner,drive = <1>;
allwinner,pull = <0>;
};
+
+ usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+ allwinner,pins = "PB10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
uart0: serial@01c28000 {
@@ -98,4 +119,10 @@
default-state = "on";
};
};
+
+ reg_usb1_vbus: usb1-vbus {
+ pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+ gpio = <&pio 1 10 0>;
+ status = "okay";
+ };
};
--
1.9.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
