On Sat, Mar 01, 2014 at 05:45:51PM +0100, Carlo Caione wrote: > index d59c826..0cef101 100644 > --- a/arch/arm/configs/sunxi_defconfig > +++ b/arch/arm/configs/sunxi_defconfig > @@ -69,3 +69,4 @@ CONFIG_NFS_FS=y > CONFIG_ROOT_NFS=y > CONFIG_NLS=y > CONFIG_PRINTK_TIME=y > +CONFIG_REGULATOR_AXP20X=y
If you want to update the defconfig do it in a separate patch.
> +static int axp20x_set_suspend_voltage(struct regulator_dev *rdev, int uV)
> +{
> + return regulator_set_voltage_sel_regmap(rdev, 0);
> +}
I'm not entirely clear what this is supposed to do but it's broken - it
both ignores the voltage that is passed in and immediately writes to the
normal voltage select register which will presumably distrupt the system.
> +static int axp20x_io_enable_regmap(struct regulator_dev *rdev)
> +{
> + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
> + rdev->desc->enable_mask, AXP20X_IO_ENABLED);
> +}
Please make some helpers for this (or extend the existing ones to cope
with more than a single bit control) - there's several other devices
which have similar multi-bit controls so we should factor this out
rather than open coding.
> + np = of_node_get(pdev->dev.parent->of_node);
> + if (!np)
> + return 0;
> +
> + regulators = of_find_node_by_name(np, "regulators");
> + if (!regulators) {
> + dev_err(&pdev->dev, "regulators node not found\n");
> + return -EINVAL;
> + }
The driver should be able to start up with no configuration provided at
all except for the device being registered - the user won't be able to
change anything but they will be able to read the current state of the
hardware which can be useful for diagnostics.
> +static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32
> workmode)
> +{
> + unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK;
> +
> + if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
> + return -EINVAL;
> +
> + if (id == AXP20X_DCDC3)
> + mask = AXP20X_WORKMODE_DCDC3_MASK;
> +
> + return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask,
> workmode);
> +}
What is a workmode?
> + pmic->rdev[i] = regulator_register(&pmic->rdesc[i], &config);
> + if (IS_ERR(pmic->rdev[i])) {
Use devm_regulator_register() and then you don't need to clean up the
regulators either.
> +static int __init axp20x_regulator_init(void)
> +{
> + return platform_driver_register(&axp20x_regulator_driver);
> +}
> +
> +subsys_initcall(axp20x_regulator_init);
module_platform_driver().
signature.asc
Description: Digital signature
