Hi! Thanks for the very fast Response! Unfortunately there is no working Linux image for cubieboard2 with Linux kernel > 3.4 so I hoped to be able to use your stk1160 port. Capturing with the easycap driver works also, but after approx 10 sec the video gets very slow and mencoder says video buffer full...but viewing the video input with mplayer over easycap driver works fine, so I think there is enough bandwidth for the uncompressed video over USB. My problem is that I cannot even make or make install your driver to test, it always displays the below mentioned error 2 (/lib/modules/3.4.79-sun7i+/build: No such file or directory.) I have package build-essentials installed
Best, André > Am 11.03.2014 um 04:40 schrieb Ezequiel Garcia <[email protected]>: > > André, > > I'm leaving the question intact for context, and adding some folks. > >> On Mon, Mar 10, 2014 at 8:55 PM, André Kerber <[email protected]> wrote: >> >> I am sorry to disturb you because of the old stk1160 driver, but I am very >> stuck and did not find any answer googling for more than 2 hours... >> >> If you could give me a tip I would be very glad! I am trying to use your >> driver on a cubieboard2 with ubuntu 12.04. If I try sudo make I always get >> the following error: >> >> /lib/modules/3.4.79-sun7i+/build: No such file or directory. > > You're probably using the backported driver, uh? Any chance you use a > newer kernel (> v3.7) ? > >> Do you have any idea? I definitely have a build in the modules directory... > > Emilio? Hans? Do you think the USB on the cubieboard2 can transfer > uncompressed (raw) video? > stk1160 needs as much as 20 MiB/sec. on isoc URBs and so far I haven't > seen many embedded systems > possible of that throughput... > -- > Ezequiel -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
