Signed-off-by: Ian Campbell <[email protected]>
---
Normally I object to this sort of churn but this is so that the patches
submitted upstream can be checkpatch clean.
---
 drivers/mmc/sunxi_mmc.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index a09e021..cf065f4 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -231,7 +231,8 @@ static int mmc_update_clk(struct mmc *mmc)
              SUNXI_MMC_CMD_UPCLK_ONLY |
              SUNXI_MMC_CMD_WAIT_PRE_OVER;
        writel(cmd, &mmchost->reg->cmd);
-       while ((readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) && timeout--);
+       while ((readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) && timeout--)
+               ;
        if (!timeout)
                return -1;
 
@@ -317,7 +318,8 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct 
mmc_data *data)
                for (i = 0; i < (byte_cnt >> 2); i++) {
                        while (--timeout &&
                               (readl(&mmchost->reg->status) &
-                               SUNXI_MMC_STATUS_FIFO_EMPTY));
+                               SUNXI_MMC_STATUS_FIFO_EMPTY))
+                               ;
                        if (timeout <= 0)
                                goto out;
                        buff[i] = readl(mmchost->database);
@@ -328,7 +330,8 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct 
mmc_data *data)
                for (i = 0; i < (byte_cnt >> 2); i++) {
                        while (--timeout &&
                               (readl(&mmchost->reg->status) &
-                               SUNXI_MMC_STATUS_FIFO_FULL));
+                               SUNXI_MMC_STATUS_FIFO_FULL))
+                               ;
                        if (timeout <= 0)
                                goto out;
                        writel(buff[i], mmchost->database);
@@ -485,7 +488,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd 
*cmd,
                        goto out;
                }
 
-               cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE | 
SUNXI_MMC_CMD_WAIT_PRE_OVER;
+               cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
                if (data->flags & MMC_DATA_WRITE)
                        cmdval |= SUNXI_MMC_CMD_WRITE;
                if (data->blocks > 1)
-- 
1.8.5.3

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to