Hi, On 04/01/2014 09:58 PM, Olliver Schinagl wrote: > Hans and Maxime > > Many thanks for working on this! I just wanted to share my appreciation on > the whole series. > > Also I see you have found use of my random patches i was typing without > compile testing, without hardware ;)
Yes they were quite useful, thank you! > Hans, I do hope you saw my my notes that i started to make on one of the > github commits pointing out some obvious mistakes that I made while hacking > late at night many months ago! Actually I may have missed those, do you have a link to them ? > I hope you received my other e-mail as well? Yes, I've just answered it. Regards, Hans > > Thanks you two! Well everybody for all the hacking! > > Olliver > > On 04/01/2014 01:28 PM, Hans de Goede wrote: >> Hi All, >> >> This patch series adds basic support for sun6i. There are some bits there >> to get SPL support going (clock setup, axp related code has been tested in >> SPL >> mode too), but DRAM setup is missing, so no SPL support. >> >> This series will give you a u-boot.bin binary which can be used to generate >> the u-boot.bin on an sdcard image generated by the allwinner tools. >> >> This u-boot.bin supports reading from mmc, has proper fdt support, and >> properly sets up all the power supply voltages on the axp221: >> -properly power the gpio's and sdcard at 3.3v, rather then undervolt them at >> 3v >> -activate ldo1, and thus give power to the phy, so now we can go and test >> wens >> gmac for a31 work >> >> If there are no objections I plan to push this series to the u-boot-sunxi >> repo >> sunxi branch in a couple of days. In the mean time you can find it here: >> https://github.com/jwrdegoede/u-boot-sunxi/commits/sunxi-a31-axp221 >> >> Regards, >> >> Hans >> > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
