On Mon, 2014-03-24 at 23:42 +0100, Olliver Schinagl wrote: > On 03/24/2014 09:52 PM, Marek Vasut wrote: > >> + /* Switch to 24MHz clock while changing PLL1 */ > >> + writel(AXI_DIV_1 << AXI_DIV_SHIFT | > >> + AHB_DIV_2 << AHB_DIV_SHIFT | > >> + APB0_DIV_1 << APB0_DIV_SHIFT | > >> + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, > >> + &ccm->cpu_ahb_apb0_cfg); > >> + sdelay(20); > > What is sdelay() function all about ? > It also is from > arch/arm/include/asm/arch-sunxi/sys_proto.h > and I thought all where replaced with udelays
Since these sdelays() are used while we are frobbing around with the clocks I'm not sure that switching to udelay is possible/wise. sdelay is documented as: * sdelay() - simple spin loop. Will be constant time as * its generally used in bypass conditions only. This * is necessary until timers are accessible. IOW it sounds like it is designed to be used in exactly these circumstances. Given the lack of documentation for what is actually required by the hardware when changing these clocks I'm a bit reluctant to go changing things. Ian. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
