Thanks. I upgraded my power suply and it works now!! Dennis On Monday, April 14, 2014 6:58:33 AM UTC-6, Dennis Kerrisk wrote: > > There is only a USB to I2S converter connected to the USB. And it does the > same thing with it removed. > > Dennis > > On Monday, April 14, 2014 6:52:54 AM UTC-6, TsvetanUsunov wrote: >> >> this usually happens when your power supply is not enough >> >> what you have connected to USB? >> do you have big LCD attached to LCD connector without external power >> supply connected to it? >> >> Tsvetan >> >> 14 април 2014, понеделник, 15:37:11 UTC+3, Dennis Kerrisk написа: >>> >>> My Olimex A20 board is now locking up on boot. It gets so far and just >>> Hangs. >>> Here is where it hangs at: >>> >>> [sw-ehci1]: open clock >>> [ 3.187148] [sw-ehci1]: open clock >>> [sw-ehci1]: Set USB Power ON >>> [ 3.213155] [sw-ehci1]: Set USB Power ON >>> <6>sw-eh >>> >>> >>> Does anyone have any ideas what my problem is? I thought it might be my >>> kernel, but it now does the same thing with the original kernel I started >>> with. >>> >>> Dennis >>> >>>
-- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
