I'm trying to build a buildroot image supporting a lcd (INNOLUX
AT070TN92).  I'm using the linux-sunxi 3.4 git sources.  The LCD driver
wants 33 MHz clock.  The spec says the clock rate min is 26.4, typ 33.3,
max 46.8.  I can build a bootable image, but when it tries to start the
LCD I get a number of error messages indicating that clock is not
available an the the LCD is in danger of being damaged.

>From reading the A20 reference manual it looks like the LCD has four
possible sources these are PLL3 1X, Pll3 2X, Pll7 1X, Pll7 2x.

Can anybody point me to the file that sets up the PLLs and maybe some
clues on the process of requesting a clock.

Thanks
Brian 
--  
"For every complex problem there is an answer that is clear, simple, and
wrong." -- H. L. Mencken

Brian Beattie<[email protected]> -- www.brian-beattie.com
LFS12947

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to