On Mon, Apr 28, 2014 at 2:08 AM, Marek Vasut <[email protected]> wrote:
> On Sunday, April 27, 2014 at 05:29:29 PM, Chen-Yu Tsai wrote:
>> On Sun, Apr 27, 2014 at 11:25 PM, Ian Campbell <[email protected]> wrote:
>> > On Sat, 2014-04-26 at 20:28 +0200, Marek Vasut wrote:
>> >> On Friday, April 18, 2014 at 08:05:50 PM, Ian Campbell wrote:
>> >> > From: Jens Kuske <[email protected]>
>> >> >
>> >> > The GMAC module in Allwinner sunxi SoCs seems to have problems with
>> >> > burst lengths > 8.
>> >>
>> >> Is there any explanation for the problems please ?
>> >
>> > Jens or Wens, can you answer this?
>>
>> IIRC, with burst lengths > 8, GMAC doesn't work, no ping, no DHCP.
>> I don't remember if it was TX or RX that suffered, or even both.
>>
>> Hope this clarifies things a bit.
>
> No, it does not at all, sorry. What you describe are symptoms, but what I want
> to know is what is the root cause of those symptoms. You did not explain that.

I can not offer much more explanation. The value was hardcoded in
Allwinner's code. The datasheets don't offer much, except this line
might be related:

  (DMA) Descriptor architecture, allowing large blocks of data transfer
  with minimum CPU intervention; each descriptor can transfer up to
  4 KB data.

Also probably related:

  4KB TX FIFO for transmission packets and 16KB RX FIFO for reception
  packets.

I'm not an expert in hardware. We could ask Allwinner, but given past
inquiries from the linux-sunxi community, I'd say getting a reply on
hardware specifics is unlikely to happen.

So my guess is that this is limited by the DWMAC IP Allwinner licensed
from Synopsys.


Cheers
ChenYu

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to