Hi, On 05/07/2014 05:50 AM, Maxime Ripard wrote: > Hi everyone, > > This patchset adds support for the USB controllers found in the > Allwinner A31. > > While the design is similar to the earlier Allwinner SoCs that are > already supported, a few details here and there change, like the fact > that the PHYs now have one clock per phy, while it used to be only one > for all the PHYs. > > Thanks, > Maxime
Thanks for working on this. Looks good, the entire series is: Reviewed-by: Hans de Goede <[email protected]> Regards, Hans > > Boris BREZILLON (2): > usb: ehci-platform: add optional reset controller retrieval > ARM: sunxi: dt: add APP4-EVB1 board support > > Maxime Ripard (5): > clk: sunxi: Implement A31 USB clock > ARM: sun6i: Add the USB clocks to the DTSI. > phy: usb: sunxi: Introduce Allwinner A31 USB PHY support > usb: ohci-platform: Enable optional use of reset controller > ARM: sun6i: dt: Add support for the USB controllers > > Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + > Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 63 ++++++++++++++++ > arch/arm/boot/dts/sun6i-a31.dtsi | 88 > ++++++++++++++++++++++ > drivers/clk/sunxi/clk-sunxi.c | 6 ++ > drivers/phy/phy-sun4i-usb.c | 35 ++++++--- > drivers/usb/host/ehci-platform.c | 25 +++++- > drivers/usb/host/ohci-platform.c | 25 +++++- > 9 files changed, 234 insertions(+), 11 deletions(-) > create mode 100644 arch/arm/boot/dts/sun6i-a31-app4-evb1.dts > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
