Hi,

On 05/27/2014 12:54 PM, Jonathan Liu wrote:
> Signed-off-by: Jonathan Liu <[email protected]>

Thanks, applied. Note I've expanded the commit message a bit,
to hopefully make review of this patch for upstream u-boot
go more smooth, see:
https://github.com/linux-sunxi/u-boot-sunxi/commit/4af825f11fbdac9e9c5560b2532474da6203cb53

Regards,

Hans


> ---
>  board/sunxi/board.c            | 28 ++++++++++++++++++++++++++++
>  include/configs/sunxi-common.h |  2 ++
>  2 files changed, 30 insertions(+)
> 
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index 6c362a3..0db46b0 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -22,9 +22,12 @@
>  #include <axp221.h>
>  #endif
>  #include <asm/arch/clock.h>
> +#include <asm/arch/cpu.h>
>  #include <asm/arch/dram.h>
>  #include <asm/arch/gpio.h>
>  #include <asm/arch/mmc.h>
> +#include <asm/io.h>
> +#include <net.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -213,3 +216,28 @@ void spl_display_print(void)
>       printf("Board: %s\n", CONFIG_SYS_BOARD_NAME);
>  }
>  #endif
> +
> +#ifdef CONFIG_MISC_INIT_R
> +int misc_init_r(void)
> +{
> +     if (!getenv("ethaddr")) {
> +             uint32_t reg_val = readl(SUNXI_SID_BASE);
> +
> +             if (reg_val) {
> +                     uint8_t mac_addr[6];
> +
> +                     mac_addr[0] = 0x02; /* Non OUI / registered MAC address 
> */
> +                     mac_addr[1] = (reg_val >>  0) & 0xff;
> +                     reg_val = readl(SUNXI_SID_BASE + 0x0c);
> +                     mac_addr[2] = (reg_val >> 24) & 0xff;
> +                     mac_addr[3] = (reg_val >> 16) & 0xff;
> +                     mac_addr[4] = (reg_val >>  8) & 0xff;
> +                     mac_addr[5] = (reg_val >>  0) & 0xff;
> +
> +                     eth_setenv_enetaddr("ethaddr", mac_addr);
> +             }
> +     }
> +
> +     return 0;
> +}
> +#endif
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index e11c4ee..948a49d 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -419,6 +419,8 @@
>  #define CONFIG_ENV_IS_NOWHERE
>  #endif
>  
> +#define CONFIG_MISC_INIT_R
> +
>  #ifndef CONFIG_SPL_BUILD
>  #include <config_distro_defaults.h>
>  #endif
> 

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to