EU3000 is USB camera. Have you enabled ov5640 by CSI/DVP interface? On Saturday, July 12, 2014 1:22:25 AM UTC+8, Jon Smirl wrote: > On Fri, Jul 11, 2014 at 1:19 PM, Danny Song <[email protected]> wrote: > > > I attached ov5640 to CB2 CS1 bus. > > > Have you enabled the ov5640 successfully ? > > > > Only ov5640 I have is the one in the EU3000. It works with the > > standard Allwinner Android image. > > > > So you build some kind of converter board from a FPC cable to the CB2 pins? > > > > > > > > > > > > > > 2014-07-12 1:17 GMT+08:00 [email protected] <[email protected]>: > > >> > > >> On Fri, Jul 11, 2014 at 12:09 PM, <[email protected]> wrote: > > >> > Hi, All > > >> > I am debugging ov5640 on CB2 now. > > >> > Who have enabled the ov5640 on CB1 or 2 successfully? Hope you to share > > >> > the experience here. > > >> > > >> How did you attach the sensor to the CB2? > > >> > > >> > > >> > On Friday, July 4, 2014 7:53:17 PM UTC+8, alex simohin wrote: > > >> >> Hi! I've done everything according to the instructions > > >> >> http://docs.cubieboard.org/tutorials/dvk521/documentations/a20/driver_porting_and_configuration. > > >> >> fex file I changed to ov5640. Pay attention to the sections in the > >> >> manual > > >> >> porting I2C bus driver and porting csi driver. > > >> >> > > >> >> вторник, 1 июля 2014 г., 11:40:54 UTC+4 пользователь [email protected] > > >> >> написал:On Thursday, June 26, 2014 10:48:35 AM UTC+4:30, alex simohin > >> >> wrote: > > >> >> > Hello everyone! I want to run on the OV5642 sensor cubieboard2 (A20). > > >> >> > First tried to run OV7670. Works well. Ov5642 sensor used in another > > >> >> > project, so the working registers I have. Tried to use them in the > >> >> > driver > > >> >> > ov5640 and get a green screen with lower stripes, and in the > >> >> > background, the > > >> >> > image movement visible. I do not know what the problem is. Maybe the > >> >> > wrong > > >> >> > color conversion? Tested through gstreamer rtp on hardware encoder > >> >> > cedar264. > > >> >> > Tried to jpeg-encode the same picture. > > >> >> hi alex how did you run ov7670 on A20 could you please share your fex > > >> >> and any other important settings? > > >> >> thanks, > > >> >> вторник, 1 июля 2014 г., 11:40:54 UTC+4 пользователь [email protected] > > >> >> написал:On Thursday, June 26, 2014 10:48:35 AM UTC+4:30, alex simohin > >> >> wrote: > > >> >> > Hello everyone! I want to run on the OV5642 sensor cubieboard2 (A20). > > >> >> > First tried to run OV7670. Works well. Ov5642 sensor used in another > > >> >> > project, so the working registers I have. Tried to use them in the > >> >> > driver > > >> >> > ov5640 and get a green screen with lower stripes, and in the > >> >> > background, the > > >> >> > image movement visible. I do not know what the problem is. Maybe the > >> >> > wrong > > >> >> > color conversion? Tested through gstreamer rtp on hardware encoder > >> >> > cedar264. > > >> >> > Tried to jpeg-encode the same picture. > > >> >> hi alex how did you run ov7670 on A20 could you please share your fex > > >> >> and any other important settings? > > >> >> thanks, > > >> > > > >> > -- > > >> > You received this message because you are subscribed to the Google > > >> > Groups "linux-sunxi" group. > > >> > To unsubscribe from this group and stop receiving emails from it, send > > >> > an email to [email protected]. > > >> > For more options, visit https://groups.google.com/d/optout. > > >> > > >> > > >> > > >> -- > > >> Jon Smirl > > >> [email protected] > > >> > > >> -- > > >> You received this message because you are subscribed to a topic in the > > >> Google Groups "linux-sunxi" group. > > >> To unsubscribe from this topic, visit > > >> https://groups.google.com/d/topic/linux-sunxi/ijitRnbl8c8/unsubscribe. > > >> To unsubscribe from this group and all its topics, send an email to > > >> [email protected]. > > >> > > >> For more options, visit https://groups.google.com/d/optout. > > > > > > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "linux-sunxi" group. > > > To unsubscribe from this group and stop receiving emails from it, send an > > > email to [email protected]. > > > For more options, visit https://groups.google.com/d/optout. > > > > > > > > -- > > Jon Smirl > > [email protected]
-- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
