Signed-off-by: Luc Verhaegen <[email protected]>
---
meminfo.c | 188 +++++++++++++++++++++++++++---------------------------------
1 files changed, 85 insertions(+), 103 deletions(-)
diff --git a/meminfo.c b/meminfo.c
index 3fe3604..34a387d 100644
--- a/meminfo.c
+++ b/meminfo.c
@@ -22,67 +22,7 @@
#include <errno.h>
#include <sys/io.h>
-#define SUNXI_DRAMC_BASE 0x01c01000
-
typedef uint32_t u32;
-typedef uint8_t u8;
-
-/*
- * Memory header definition copied from u-boot
arch/arm/include/asm/arch-sunxi/dram.h
- * (C) Copyright 2007-2012 Allwinner Technology Co., Ltd.
<www.allwinnertech.com>)
- */
-struct sunxi_dram_reg {
- u32 ccr; /* 0x00 controller configuration register */
- u32 dcr; /* 0x04 dram configuration register */
- u32 iocr; /* 0x08 i/o configuration register */
- u32 csr; /* 0x0c controller status register */
- u32 drr; /* 0x10 dram refresh register */
- u32 tpr0; /* 0x14 dram timing parameters register 0 */
- u32 tpr1; /* 0x18 dram timing parameters register 1 */
- u32 tpr2; /* 0x1c dram timing parameters register 2 */
- u32 gdllcr; /* 0x20 global dll control register */
- u8 res0[0x28];
- u32 rslr0; /* 0x4c rank system latency register */
- u32 rslr1; /* 0x50 rank system latency register */
- u8 res1[0x8];
- u32 rdgr0; /* 0x5c rank dqs gating register */
- u32 rdgr1; /* 0x60 rank dqs gating register */
- u8 res2[0x34];
- u32 odtcr; /* 0x98 odt configuration register */
- u32 dtr0; /* 0x9c data training register 0 */
- u32 dtr1; /* 0xa0 data training register 1 */
- u32 dtar; /* 0xa4 data training address register */
- u32 zqcr0; /* 0xa8 zq control register 0 */
- u32 zqcr1; /* 0xac zq control register 1 */
- u32 zqsr; /* 0xb0 zq status register */
- u32 idcr; /* 0xb4 initializaton delay configure reg */
- u8 res3[0x138];
- u32 mr; /* 0x1f0 mode register */
- u32 emr; /* 0x1f4 extended mode register */
- u32 emr2; /* 0x1f8 extended mode register */
- u32 emr3; /* 0x1fc extended mode register */
- u32 dllctr; /* 0x200 dll control register */
- u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */
- /* 0x208 dll control register 1(byte 1) */
- /* 0x20c dll control register 2(byte 2) */
- /* 0x210 dll control register 3(byte 3) */
- /* 0x214 dll control register 4(byte 4) */
- u32 dqtr0; /* 0x218 dq timing register */
- u32 dqtr1; /* 0x21c dq timing register */
- u32 dqtr2; /* 0x220 dq timing register */
- u32 dqtr3; /* 0x224 dq timing register */
- u32 dqstr; /* 0x228 dqs timing register */
- u32 dqsbtr; /* 0x22c dqsb timing register */
- u32 mcr; /* 0x230 mode configure register */
- u8 res[0x8];
- u32 reg_23c; /* 0x23c register description unknown!!! */
- u32 apr; /* 0x240 arbiter period register */
- u32 pldtr; /* 0x244 priority level data threshold reg */
- u8 res5[0x8];
- u32 hpcr[32]; /* 0x250 host port configure register */
- u8 res6[0x10];
- u32 csel; /* 0x2e0 controller select register */
-};
struct dram_para {
u32 baseaddr;
@@ -110,21 +50,6 @@ struct dram_para {
#define DEVMEM_FILE "/dev/mem"
static int devmem_fd;
-volatile void *map_physical_memory(uint32_t addr, size_t len)
-{
- volatile void *mem;
-
- mem = (volatile void *) mmap(NULL, len, PROT_READ, MAP_SHARED, devmem_fd,
(off_t) addr);
-
- if (mem == MAP_FAILED)
- {
- perror("mmap");
- exit (1);
- }
-
- return mem;
-}
-
/*
* Libv's favourite register handling calls.
*/
@@ -188,6 +113,88 @@ dram_clock_read(struct dram_para *dram_para)
}
/*
+ * Read DRAM parameters.
+ */
+#define SUNXI_IO_DRAM_BASE 0x01C01000
+#define SUNXI_IO_DRAM_SIZE 0x00001000
+
+#define SUNXI_IO_DRAM_DCR 0x004 /* dram configuration */
+#define SUNXI_IO_DRAM_IOCR 0x008 /* i/o configuration */
+
+#define SUNXI_IO_DRAM_TPR0 0x014 /* dram timing parameters register 0 */
+#define SUNXI_IO_DRAM_TPR1 0x018 /* dram timing parameters register 1 */
+#define SUNXI_IO_DRAM_TPR2 0x01C /* dram timing parameters register 2 */
+
+#define SUNXI_IO_DRAM_ZQCR0 0x0A8 /* zq control register 0 */
+
+#define SUNXI_IO_DRAM_MR 0x1F0 /* mode register */
+#define SUNXI_IO_DRAM_EMR 0x1F4 /* extended mode register */
+#define SUNXI_IO_DRAM_EMR2 0x1F8 /* extended mode register */
+#define SUNXI_IO_DRAM_EMR3 0x1FC /* extended mode register */
+
+#define SUNXI_IO_DRAM_DLLCR0 0x204 /* dll control register 0(byte 0) */
+#define SUNXI_IO_DRAM_DLLCR1 0x208 /* dll control register 1(byte 1) */
+#define SUNXI_IO_DRAM_DLLCR2 0x20C /* dll control register 2(byte 2) */
+#define SUNXI_IO_DRAM_DLLCR3 0x210 /* dll control register 3(byte 3) */
+#define SUNXI_IO_DRAM_DLLCR4 0x214 /* dll control register 4(byte 4) */
+
+static int
+dram_parameters_read(struct dram_para *dram_para)
+{
+ void *base;
+ unsigned int zqcr0, dcr;
+ unsigned int dllcr0, dllcr1, dllcr2, dllcr3, dllcr4;
+
+ base = mmap(NULL, SUNXI_IO_DRAM_SIZE, PROT_READ,
+ MAP_SHARED, devmem_fd, SUNXI_IO_DRAM_BASE);
+ if (base == MAP_FAILED) {
+ fprintf(stderr, "Failed to map dram registers: %s\n",
+ strerror(errno));
+ return errno;
+ }
+
+ dram_para->tpr0 = sunxi_io_read(base, SUNXI_IO_DRAM_TPR0);
+ dram_para->tpr1 = sunxi_io_read(base, SUNXI_IO_DRAM_TPR1);
+ dram_para->tpr2 = sunxi_io_read(base, SUNXI_IO_DRAM_TPR2);
+
+ dllcr0 = (sunxi_io_read(base, SUNXI_IO_DRAM_DLLCR0) >> 6) & 0x3F;
+ dllcr1 = (sunxi_io_read(base, SUNXI_IO_DRAM_DLLCR1) >> 14) & 0x0F;
+ dllcr2 = (sunxi_io_read(base, SUNXI_IO_DRAM_DLLCR2) >> 14) & 0x0F;
+ dllcr3 = (sunxi_io_read(base, SUNXI_IO_DRAM_DLLCR3) >> 14) & 0x0F;
+ dllcr4 = (sunxi_io_read(base, SUNXI_IO_DRAM_DLLCR4) >> 14) & 0x0F;
+
+ dram_para->tpr3 = (dllcr0 << 16) |
+ (dllcr4 << 12) | (dllcr3 << 8) | (dllcr2 << 4) | dllcr1;
+
+ dram_para->cas = (sunxi_io_read(base, SUNXI_IO_DRAM_MR) >> 4) & 0x0F;
+ dram_para->emr1 = sunxi_io_read(base, SUNXI_IO_DRAM_EMR);
+ dram_para->emr2 = sunxi_io_read(base, SUNXI_IO_DRAM_EMR2);
+ dram_para->emr3 = sunxi_io_read(base, SUNXI_IO_DRAM_EMR3);
+
+ dram_para->odt_en = sunxi_io_read(base, SUNXI_IO_DRAM_IOCR) & 0x03;
+ zqcr0 = sunxi_io_read(base, SUNXI_IO_DRAM_ZQCR0);
+ dram_para->zq = (zqcr0 & 0xf0000000) |
+ ((zqcr0 >> 20) & 0xff) |
+ ((zqcr0 & 0xfffff) << 8);
+
+ dcr = sunxi_io_read(base, SUNXI_IO_DRAM_DCR);
+ if (dcr & 0x01) {
+ dram_para->cas += 4;
+ dram_para->type = 3;
+ } else
+ dram_para->type = 2;
+
+ dram_para->density = (1 << ((dcr >> 3) & 0x07)) * 256;
+ dram_para->rank_num = ((dcr >> 10) & 0x03) + 1;
+ dram_para->io_width = ((dcr >> 1) & 0x03) * 8;
+ dram_para->bus_width = (((dcr >> 6) & 3) + 1) * 8;
+
+ munmap(base, SUNXI_IO_DRAM_SIZE);
+
+ return 0;
+}
+
+/*
* Print a dram.c that can be stuck immediately into u-boot.
*/
void
@@ -229,7 +236,6 @@ dram_para_print_uboot(struct dram_para *dram_para)
int main(int argc, char **argv)
{
- volatile struct sunxi_dram_reg *r;
struct dram_para p = {0};
int ret;
@@ -240,30 +246,9 @@ int main(int argc, char **argv)
return errno;
}
- r = map_physical_memory(SUNXI_DRAMC_BASE, 4096);
-
- /* Convert information found inside registers back to dram_para struct */
- p.tpr0 = r->tpr0;
- p.tpr1 = r->tpr1;
- p.tpr2 = r->tpr2;
- p.tpr3 = ((((r->dllcr[0]) >> 6) & 0x3f) << 16) |
- ((((r->dllcr[1]) >> 14) & 0xf) << 0) |
- ((((r->dllcr[2]) >> 14) & 0xf) << 4) |
- ((((r->dllcr[3]) >> 14) & 0xf) << 8) |
- ((((r->dllcr[4]) >> 14) & 0xf) << 12);
- p.emr1 = r->emr;
- p.emr2 = r->emr2;
- p.emr3 = r->emr3;
- p.type = (r->dcr & 0x1 ? 3 : 2);
- p.odt_en = (r->iocr & 0x3);
- p.zq = (r->zqcr0 & 0xf0000000)+(r->zqcr0 >> 20 & 0xff)+((r->zqcr0 &
0xfffff) << 8);
- p.cas = (r->mr >> 4 & 15);
- if (p.type == 3)
- p.cas += 4;
- p.density = 1 << (8 + ((r->dcr >> 3) & 7));
- p.rank_num = (r->dcr >> 10 & 3)+1;
- p.io_width = (r->dcr >> 1 & 3) << 3;
- p.bus_width = ((r->dcr >> 6 & 3)+1) << 3;
+ ret = dram_parameters_read(&p);
+ if (ret)
+ return ret;
ret = dram_clock_read(&p);
if (ret)
@@ -271,9 +256,6 @@ int main(int argc, char **argv)
dram_para_print_uboot(&p);
- /* Clean up */
- munmap((void *)r, 4096);
-
return 0;
}
--
1.7.7
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
