On Fri, Aug 29, 2014 at 10:42:15PM +0200, Michal Suchanek wrote:
> As this entry is promoted as generic tablet bootloader and uart turned
> on prevents booting at least on some tablets it should be removed.
> 
> Separate A13_MID_UART entry is provided as sample for people who are
> willing to take apart their tablet and happen to find uart wired as was
> on the original A13_MID board.
> 
> Signed-off-by: Michal Suchanek <[email protected]>
> ---
>  boards.cfg |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/boards.cfg b/boards.cfg
> index 525d8a2..2775116 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -380,7 +380,8 @@ Active  arm         armv7          sunxi       -          
>      sunxi
>  Active  arm         armv7          sunxi       -               sunxi         
>       A13-OLinuXino_FEL_sdcon              
> sun5i:A13_OLINUXINO,SPL_FEL,STATUSLED=201,UART0_PORT_F                        
>                                                     -
>  Active  arm         armv7          sunxi       -               sunxi         
>       A13-OLinuXinoM                       
> sun5i:A13_OLINUXINOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2                    
>                                                     -
>  Active  arm         armv7          sunxi       -               sunxi         
>       A13-OLinuXinoM_FEL                   
> sun5i:A13_OLINUXINOM,SPL_FEL,NO_AXP,STATUSLED=201,CONS_INDEX=2                
>                                                     -
> -Active  arm         armv7          sunxi       -               sunxi         
>       A13_MID                              sun5i:A13_MID,SPL,CONS_INDEX=2     
>                                                                               
>                  -
> +Active  arm         armv7          sunxi       -               sunxi         
>       A13_MID                              sun5i:A13_MID,SPL                  
>                                                                               
>                  -
> +Active  arm         armv7          sunxi       -               sunxi         
>       A13_MID_UART                         sun5i:A13_MID,SPL,CONS_INDEX=2     
>                                                                               
>                  -
>  Active  arm         armv7          sunxi       -               sunxi         
>       A86V4                                sun5i:A86V4,SPL                    
>                                                                               
>                  -
>  Active  arm         armv7          sunxi       -               sunxi         
>       INET86VS                             sun5i:INET86VS,SPL                 
>                                                                               
>                  -
>  Active  arm         armv7          sunxi       -               sunxi         
>       INET86VS_FEL_sdcon                   
> sun5i:INET86VS,SPL_FEL,UART0_PORT_F                                           
>                                                     -

This seems wholly incorrect. Whatever the A13-MID was, no device page
was created, and no knowledge exists anymore on what it really was. At 
best, it has to be assumed that the console index was correct.

As soon as Chen-yu pushes HSG H702 uboot support, and he stops using 
A13_MID, i will remove this entry.

Luc Verhaegen.

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to