My Cubietruck recently decided it doesn't want to boot any more.
So I finally got a new USB<->serial converter to try and figure out what
happens, and here's what it gives me:
U-Boot SPL 2014.01-rc1-00878-gaf9f405 (Feb 07 2014 - 05:49:37)
Board: Cubietruck
DRAM: 0 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: mmc init failed: err - -19
### ERROR ### Please RESET the board ###
Other times it says:
HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =2048
ERROR! block 2 doesn't store head of Boot1 copy.
ERROR! block 3 doesn't store head of Boot1 copy.
ERROR! block 4 doesn't store head of Boot1 copy.
ERROR! block 5 doesn't store head of Boot1 copy.
ERROR! block 6 doesn't store head of Boot1 copy.
Can't find a good Boot1 copy in nand.
Ready to quit "load_Boot1_from_nand".
Ready to disable icache.
Jump to Fel.
I suspected a problem with the SD card, but the SD card works fine as
far as I can tell, and I tried another card with the same result.
Any idea what might be going on?
Stefan
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
