You will need to recompile U-Boot and kernel for the A20. The rest will be the same. Just use the defconfigs that are in the sunxi repositories. Incidentally I did the opposite yesterday, I accidently used my A20 sd-card in the A10. I didn't get anything from the serial port.
Cheers, Paul. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Saturday, 13 September 2014 9:52 PM To: [email protected] Subject: [linux-sunxi] OpenWRT on Olimex A20-OLinuXino-LIME Hello sunxi-Team, I wanted to install OpenWRT on my Olimex A20-LinuXino-LIME (http://linux-sunxi.org/Olimex_A20-OLinuXino-Lime). I saw that only the A10-LIME Version is described in the OpenWRT Wiki (http://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi) - but as the A20-LIME only got the Dual Core A20 instead of the pin compatible A10 Single Core, I thought it should maybe work. I concluded all steps as described on the Installation progress ( http://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi#installation.process ) with the A10-LIME files. However, after powering on the board, the HDMI screen stays dark and my serial console shows me only following output: U-Boot SPL 2014.04 (Sep 12 2014 - 15:21:28) Board: A10-OLinuXino-Lime DRAM: After that, nothing happens anymore. Could somebody help me? Thanks a lot, N -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
