From: Marcus Cooper <codekip...@gmail.com>
This fex was extracted from the latest vendor image
M9_V3.1.4.
Signed-off-by: Marcus Cooper <codekip...@gmail.com>
---
sys_config/a31/mele_m9.fex | 1475 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 1475 insertions(+)
create mode 100644 sys_config/a31/mele_m9.fex
diff --git a/sys_config/a31/mele_m9.fex b/sys_config/a31/mele_m9.fex
new file mode 100644
index 0000000..110843e
--- /dev/null
+++ b/sys_config/a31/mele_m9.fex
@@ -0,0 +1,1475 @@
+;A31 PAD application
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
+;---------------------------------------------------------------------------------------------------------
+
+[product]
+version = "100"
+machine = "evb"
+
+[platform]
+eraseflag = 1
+;----------------------------------------------------------------------------------
+; system configuration
+; ?
+;dcdc1_vol ---set dcdc1
voltage,mV,1600-3400,100mV/step
+;dcdc2_vol ---set dcdc2
voltage,mV,600-1540,20mV/step
+;dcdc3_vol ---set dcdc3
voltage,mV,600-1860,20mV/step
+;dcdc4_vol ---set dcdc4
voltage,mV,600-1540,20mV/step
+;dcdc5_vol ---set dcdc5
voltage,mV,1000-2550,50mV/step
+;aldo2_vol ---set aldo2
voltage,mV,700-3300,100mV/step
+;aldo3_vol ---set aldo3
voltage,mV,700-3300,100mV/step
+;----------------------------------------------------------------------------------
+[target]
+boot_clock = 1008
+storage_type = -1
+
+[boot_init_gpio]
+use = 1
+
+[power_sply]
+dcdc1_vol = 3300
+dcdc2_vol = 1200
+dcdc3_vol = 1260
+dcdc4_vol = 1200
+dcdc5_vol = 1500
+aldo2_vol = 1800
+aldo3_vol = 3000
+
+[card_boot]
+logical_start = 40960
+sprite_gpio0 = port:PH13<1><default><default><0>
+sprite_work_delay = 500
+sprite_err_delay = 200
+
+[card0_boot_para]
+card_ctrl = 0
+card_high_speed = 1
+card_line = 4
+sdc_d1 = port:PF0<2><1><default><default>
+sdc_d0 = port:PF1<2><1><default><default>
+sdc_clk = port:PF2<2><1><default><default>
+sdc_cmd = port:PF3<2><1><default><default>
+sdc_d3 = port:PF4<2><1><default><default>
+sdc_d2 = port:PF5<2><1><default><default>
+
+[card2_boot_para]
+card_ctrl = 2
+card_high_speed = 1
+card_line = 4
+sdc_cmd = port:PC6<3><1><default><default>
+sdc_clk = port:PC7<3><1><default><default>
+sdc_d0 = port:PC8<3><1><default><default>
+sdc_d1 = port:PC9<3><1><default><default>
+sdc_d2 = port:PC10<3><1><default><default>
+sdc_d3 = port:PC11<3><1><default><default>
+
+[twi_para]
+twi_port = 0
+twi_scl = port:PH14<2><default><default><default>
+twi_sda = port:PH15<2><default><default><default>
+
+[uart_para]
+uart_debug_port = 0
+uart_debug_tx = port:PH20<2><1><default><default>
+uart_debug_rx = port:PH21<2><1><default><default>
+
+[jtag_para]
+jtag_enable = 0
+jtag_ms = port:PH9<3><default><default><default>
+jtag_ck = port:PH10<3><default><default><default>
+jtag_do = port:PH11<3><default><default><default>
+jtag_di = port:PH12<3><default><default><default>
+
+[clock]
+pll3 = 297
+pll4 = 300
+pll6 = 600
+pll7 = 297
+pll8 = 360
+pll9 = 297
+pll10 = 702
+
+;*****************************************************************************
+;sdram configuration
+;
+;*****************************************************************************
+[dram_para]
+dram_clk = 312
+dram_type = 3
+dram_zq = 0x78
+dram_odt_en = 0
+dram_para1 = 0x10F40800
+dram_para2 = 0x1211
+dram_mr0 = 0x1A50
+dram_mr1 = 0x4
+dram_mr2 = 0x18
+dram_mr3 = 0
+dram_tpr0 = 0
+dram_tpr1 = 0x80000800
+dram_tpr2 = 0x39a70140
+dram_tpr3 = 0xa092e74c
+dram_tpr4 = 0x2948c209
+dram_tpr5 = 0x8944422c
+dram_tpr6 = 0x30028480
+dram_tpr7 = 0x2a3297
+dram_tpr8 = 0x5034fa8
+dram_tpr9 = 0x36353d8
+dram_tpr10 = 0
+dram_tpr11 = 0
+dram_tpr12 = 0
+dram_tpr13 = 0
+
+;----------------------------------------------------------------------------------
+;os life cycle para configuration
+;----------------------------------------------------------------------------------
+
+;---------------------------------------------------------------------------------------------------------
+; if 1 == standby_mode, then support super standby;
+; else, support normal standby.
+;---------------------------------------------------------------------------------------------------------
+[pm_para]
+standby_mode = 1
+
+;---------------------------------------------------------------------------------------------------------
+; wakeup_src_para:
+; sometimes, u would like to add more wakeup src in standby mode, these
para will be
+; help;
+; u need to make sure the standby mode support the wakeup src. Also, some
hw
+; condition must be guaranteed.
+; including:
+; cpu_en: power on or off.
+; 1: mean power on
+; 0: mean power off
+; cpu_freq: indicating lowest freq. unit is Mhz;
+; dram selfresh_en: selfresh or not.
+; 1: enable enter selfresh
+; 0: disable enter selfresh
+; dram_pll: if not enter selfresh, indicating lowest freq. unit is Mhz;
+; wakeup_event:
+; (0x4 ) /* low battery event */
+; (0x8 ) /* usb insert event */
+; (0x10 ) /* charger insert event */
+; (0x20 ) /* power key ascend event */
+; (0x40 ) /* power key descend event */
+; (0x80 ) /* power key short press event */
+; (0x100 ) /* power key long press event */
+; (0x200 ) /* IR key event */
+; (0x400 ) /* alarm0 event */
+; (0x800 ) /* alarm1 event */
+; (0x1000 ) /* debug test event */
+; (0x2000 ) /* GPIO interrupt event, only used in extended
standby */
+; (0x4000 ) /* USBMOUSE key event, only used in extended
standby */
+; (0x8000 ) /* key event, volume home menu enter, only used
in extended standby */
+; (0x10000) /* earphone insert/pull event, only used in
extended standby */
+; (0x180 ) /* power key short and long press event */
+; wakeup_src: to make the scenario work, the wakeup src is needed.
+;---------------------------------------------------------------------------------------------------------
+[wakeup_src_para]
+cpu_en = 0
+cpu_freq = 48
+; (cpu:apb:ahb)
+pll_ratio = 0x111
+dram_selfresh_en = 1
+dram_freq = 36
+wakeup_event =
+wakeup_src0 = port:PL5<2><1><default><default>
+
+
+;------------------------------------------------------------------------------;
+; 10/100/100Mbps Ethernet MAC Controller Configure
;
+;------------------------------------------------------------------------------;
+; 配置选项： ;
+; gmac_used --- 1: gmac used, 0: not used
;
+;------------------------------------------------------------------------------;
+; gmac_interface --- 1: PHY_INTERFACE_MODE_MII
;
+; 2: PHY_INTERFACE_MODE_GMII
;
+; 3: PHY_INTERFACE_MODE_RGMII
;
+; default: PHY_INTERFACE_MODE_MII
;
+;------------------------------------------------------------------------------;
+; MII GMII RGMII MII GMII RGMII MII GMII RGMII
;
+;PA00~03 * * * PA10 * * PA20 * * *
;
+; PA04 * PA11~14 * * * PA21 * *
;
+; PA05 * PA15 * PA22 * *
;
+; PA06 * PA16 * PA23 * *
;
+; PA07 * PA17 * PA24 * *
;
+; PA08 * * PA18 * PA25 * *
;
+; PA09 * * * PA19 * * * PA26~27 * * *
;
+;------------------------------------------------------------------------------;
+[gmac_para]
+gmac_used = 1
+gmac_interface = 1
+gmac_power = "axp22_dldo1"
+gmac_txd0 = port:PA00<2><default><default><default>
+gmac_txd1 = port:PA01<2><default><default><default>
+gmac_txd2 = port:PA02<2><default><default><default>
+gmac_txd3 = port:PA03<2><default><default><default>
+gmac_txd4 =
+gmac_txd5 =
+gmac_txd6 =
+gmac_txd7 =
+gmac_txclk = port:PA08<2><default><default><default>
+gmac_txen = port:PA09<2><default><default><default>
+gmac_gtxclk =
+gmac_rxd0 = port:PA11<2><default><default><default>
+gmac_rxd1 = port:PA12<2><default><default><default>
+gmac_rxd2 = port:PA13<2><default><default><default>
+gmac_rxd3 = port:PA14<2><default><default><default>
+gmac_rxd4 =
+gmac_rxd5 =
+gmac_rxd6 =
+gmac_rxd7 =
+gmac_rxdv = port:PA19<2><default><default><default>
+gmac_rxclk = port:PA20<2><default><default><default>
+gmac_txerr = port:PA21<2><default><default><default>
+gmac_rxerr = port:PA22<2><default><default><default>
+gmac_col = port:PA23<2><default><default><default>
+gmac_crs = port:PA24<2><default><default><default>
+gmac_clkin =
+gmac_mdc = port:PA26<2><default><default><default>
+gmac_mdio = port:PA27<2><default><default><default>
+
+;----------------------------------------------------------------------------------
+;i2c configuration
+;----------------------------------------------------------------------------------
+[twi0_para]
+twi_used = 1
+twi_scl = port:PH14<2><default><default><default>
+twi_sda = port:PH15<2><default><default><default>
+
+[twi1_para]
+twi_used = 1
+twi_scl = port:PH16<2><default><default><default>
+twi_sda = port:PH17<2><default><default><default>
+
+[twi2_para]
+twi_used = 1
+twi_scl = port:PH18<2><default><default><default>
+twi_sda = port:PH19<2><default><default><default>
+
+[twi3_para]
+twi_used = 0
+twi_scl = port:PB05<4><default><default><default>
+twi_sda = port:PB06<4><default><default><default>
+
+;----------------------------------------------------------------------------------
+;uart configuration
+;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
+;----------------------------------------------------------------------------------
+[uart_para0]
+uart_used = 1
+uart_port = 0
+uart_type = 2
+uart_tx = port:PH20<2><1><default><default>
+uart_rx = port:PH21<2><1><default><default>
+
+[uart_para1]
+uart_used = 0
+uart_port = 1
+uart_type = 8
+uart_tx = port:PA04<4><1><default><default>
+uart_rx = port:PA05<4><1><default><default>
+uart_rts = port:PA06<4><1><default><default>
+uart_cts = port:PA07<4><1><default><default>
+;uart_dtr = port:PA00<4><1><default><default>
+;uart_dsr = port:PA01<4><1><default><default>
+;uart_dcd = port:PA02<4><1><default><default>
+;uart_ring = port:PA03<4><1><default><default>
+
+[uart_para2]
+uart_used = 1
+uart_port = 2
+uart_type = 4
+uart_tx = port:PG06<2><1><default><default>
+uart_rx = port:PG07<2><1><default><default>
+uart_rts = port:PG08<2><1><default><default>
+uart_cts = port:PG09<2><1><default><default>
+
+[uart_para3]
+uart_used = 0
+uart_port = 3
+uart_type = 4
+uart_tx = port:PB05<3><1><default><default>
+uart_rx = port:PB06<3><1><default><default>
+uart_rts = port:PB04<3><1><default><default>
+uart_cts = port:PB00<3><1><default><default>
+
+[uart_para4]
+uart_used = 0
+uart_port = 4
+uart_type = 2
+uart_tx = port:PG17<2><1><default><default>
+uart_rx = port:PG18<2><1><default><default>
+uart_rts = port:PB04<3><1><default><default>
+uart_cts = port:PB00<3><1><default><default>
+
+[uart_para5]
+uart_used = 0
+uart_port = 5
+uart_type = 4
+uart_tx = port:PE04<3><1><default><default>
+uart_rx = port:PE05<3><1><default><default>
+uart_rts = port:PE06<3><1><default><default>
+uart_cts = port:PE07<3><1><default><default>
+
+;----------------------------------------------------------------------------------
+;spi configuration
+;----------------------------------------------------------------------------------
+[spi0_para]
+spi_used = 0
+spi_cs_bitmap = 1
+spi_cs0 = port:PC27<3><1><default><default>
+spi_sclk = port:PC02<3><default><default><default>
+spi_mosi = port:PC00<3><default><default><default>
+spi_miso = port:PC01<3><default><default><default>
+
+[spi1_para]
+spi_used = 0
+spi_cs_bitmap = 1
+spi_cs1 = port:PG12<2><1><default><default>
+spi_cs0 = port:PG13<2><1><default><default>
+spi_sclk = port:PG14<2><default><default><default>
+spi_mosi = port:PG15<2><default><default><default>
+spi_miso = port:PG16<2><default><default><default>
+
+[spi2_para]
+spi_used = 0
+spi_cs_bitmap = 1
+spi_cs0 = port:PH09<2><default><default><default>
+spi_sclk = port:PH10<2><default><default><default>
+spi_mosi = port:PH11<2><default><default><default>
+spi_miso = port:PH12<2><default><default><default>
+
+[spi3_para]
+spi_used = 0
+spi_cs_bitmap = 1
+spi_cs0 = port:PA21<4><default><default><default>
+spi_sclk = port:PA22<4><default><default><default>
+spi_mosi = port:PA23<4><default><default><default>
+spi_miso = port:PA24<4><default><default><default>
+spi_cs1 = port:PA25<4><default><default><default>
+
+;----------------------------------------------------------------------------------
+;resistance tp configuration
+;----------------------------------------------------------------------------------
+[rtp_para]
+rtp_used = 0
+rtp_screen_size = 5
+rtp_regidity_level = 5
+rtp_press_threshold_enable = 0
+rtp_press_threshold = 0x1f40
+rtp_sensitive_level = 0xf
+rtp_exchange_x_y_flag = 0
+
+;----------------------------------------------------------------------------------
+;capacitor tp configuration
+;external int function
+;wakeup output function
+;notice --- tp_int_port & tp_io_port use the same port
+;----------------------------------------------------------------------------------
+[ctp_para]
+ctp_used = 0
+ctp_twi_id = 1
+ctp_twi_addr = 0x5d
+ctp_screen_max_x = 1280
+ctp_screen_max_y = 800
+ctp_revert_x_flag = 1
+ctp_revert_y_flag = 1
+ctp_exchange_x_y_flag = 1
+
+ctp_int_port = port:PA03<6><default><default><default>
+ctp_wakeup = port:PA02<1><default><default><1>
+;----------------------------------------------------------------------------------
+;touch key configuration
+;----------------------------------------------------------------------------------
+[tkey_para]
+tkey_used = 0
+tkey_twi_id =
+tkey_twi_addr =
+tkey_int =
+
+;----------------------------------------------------------------------------------
+;motor configuration
+;----------------------------------------------------------------------------------
+[motor_para]
+motor_used = 0
+motor_shake = port:power3<1><default><default><1>
+
+[nand0_para]
+nand_support_2ch = 1
+
+nand0_used = 1
+nand0_we = port:PC00<2><default><default><default>
+nand0_ale = port:PC01<2><default><default><default>
+nand0_cle = port:PC02<2><default><default><default>
+nand0_ce1 = port:PC03<2><default><default><default>
+nand0_ce0 = port:PC04<2><default><default><default>
+nand0_nre = port:PC05<2><default><default><default>
+nand0_rb0 = port:PC06<2><default><default><default>
+nand0_rb1 = port:PC07<2><default><default><default>
+nand0_d0 = port:PC08<2><default><default><default>
+nand0_d1 = port:PC09<2><default><default><default>
+nand0_d2 = port:PC10<2><default><default><default>
+nand0_d3 = port:PC11<2><default><default><default>
+nand0_d4 = port:PC12<2><default><default><default>
+nand0_d5 = port:PC13<2><default><default><default>
+nand0_d6 = port:PC14<2><default><default><default>
+nand0_d7 = port:PC15<2><default><default><default>
+nand0_ce2 = port:PC25<2><default><default><default>
+nand0_ce3 = port:PC26<2><default><default><default>
+nand0_ndqs = port:PC24<2><default><default><default>
+
+[nand1_para]
+nand1_used = 1
+nand1_we = port:PH00<2><default><default><default>
+nand1_ale = port:PH01<2><default><default><default>
+nand1_cle = port:PH02<2><default><default><default>
+nand1_ce1 = port:PH03<2><default><default><default>
+nand1_ce0 = port:PH04<2><default><default><default>
+nand1_nre = port:PH05<2><default><default><default>
+nand1_rb0 = port:PH06<2><default><default><default>
+nand1_rb1 = port:PH07<2><default><default><default>
+nand1_d0 = port:PC16<3><default><default><default>
+nand1_d1 = port:PC17<3><default><default><default>
+nand1_d2 = port:PC18<3><default><default><default>
+nand1_d3 = port:PC19<3><default><default><default>
+nand1_d4 = port:PC20<3><default><default><default>
+nand1_d5 = port:PC21<3><default><default><default>
+nand1_d6 = port:PC22<3><default><default><default>
+nand1_d7 = port:PC23<3><default><default><default>
+nand1_ce2 = port:PH29<2><default><default><default>
+nand1_ce3 = port:PH30<2><default><default><default>
+nand1_ndqs = port:PH08<2><default><default><default>
+
+;----------------------------------------------------------------------------------
+;disp init configuration
+;
+;disp_mode (0:screen0<screen0,fb0>)
+;screenx_output_type (0:none; 1:lcd; 3:hdmi;)
+;screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p
4:720p50)
+; (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50
10:1080p60)
+;fbx format (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551
9:RGB888 10:ARGB8888 12:ARGB4444)
+;fbx pixel sequence (0:ARGB 1:BGRA 2:ABGR 3:RGBA)
+;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output
resolution while equal 0)
+;lcdx_backlight (lcd init backlight,the range:[0,256],default:197
+;lcdx_yy (lcd init screen bright/contrast/saturation/hue,
value:0~100, default:50/50/57/50)
+;----------------------------------------------------------------------------------
+[disp_init]
+disp_init_enable = 1
+disp_mode = 0
+
+screen0_output_type = 3
+screen0_output_mode = 5
+
+screen1_output_type = 1
+screen1_output_mode = 4
+
+fb0_format = 10
+fb0_pixel_sequence = 0
+fb0_scaler_mode_enable = 0
+fb0_width = 0
+fb0_height = 0
+
+fb1_format = 10
+fb1_pixel_sequence = 0
+fb1_scaler_mode_enable = 0
+fb1_width = 0
+fb1_height = 0
+
+lcd0_backlight = 50
+lcd1_backlight = 50
+
+lcd0_bright = 50
+lcd0_contrast = 50
+lcd0_saturation = 57
+lcd0_hue = 50
+
+lcd1_bright = 50
+lcd1_contrast = 50
+lcd1_saturation = 57
+lcd1_hue = 50
+
+;----------------------------------------------------------------------------------
+;lcd0 configuration
+
+;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp
+;lcd_x: lcd horizontal resolution
+;lcd_y: lcd vertical resolution
+;lcd_width: width of lcd in mm
+;lcd_height: height of lcd in mm
+;lcd_dclk_freq: in MHZ unit
+;lcd_pwm_freq: in HZ unit
+;lcd_pwm_pol: lcd backlight PWM polarity
+;lcd_pwm_max_limit lcd backlight PWM max limit(<=255)
+;lcd_hbp: hsync back porch
+;lcd_ht: hsync total cycle
+;lcd_vbp: vsync back porch
+;lcd_vt: vysnc total cycle
+;lcd_hspw: hsync plus width
+;lcd_vspw: vysnc plus width
+;lcd_lvds_if: 0:single link; 1:dual link
+;lcd_lvds_colordepth: 0:8bit; 1:6bit
+;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
+;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656
dither
+;lcd_gamma_en lcd gamma correction enable
+;lcd_bright_curve_en lcd bright curve correction enable
+;lcd_cmap_en lcd color map function enable
+;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than
10inch)
+;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10;
+; decrease it while lcd is not bright enough; increase
while lcd is too bright
+;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch)
+;----------------------------------------------------------------------------------
+[lcd0_para]
+lcd_used = 0
+
+lcd_if = 3
+lcd_x = 1280
+lcd_y = 800
+lcd_width = 150
+lcd_height = 94
+lcd_dclk_freq = 70
+lcd_pwm_freq = 50000
+lcd_pwm_pol = 0
+lcd_hbp = 20
+lcd_ht = 1418
+lcd_hspw = 10
+lcd_vbp = 10
+lcd_vt = 814
+lcd_vspw = 5
+lcd_lvds_if = 0
+lcd_lvds_colordepth = 1
+lcd_lvds_mode = 0
+lcd_frm = 1
+lcd_gamma_en = 0
+lcd_bright_curve_en = 0
+lcd_cmap_en = 0
+
+deu_mode = 0
+lcdgamma4iep = 22
+smart_color = 90
+
+lcd_bl_en = port:PA25<1><0><default><1>
+lcd_power = port:power2<1><0><default><1>
+lcd_pwm = port:PH13<2><0><default><default>
+
+lcdd0 = port:PD00<3><0><default><default>
+lcdd1 = port:PD01<3><0><default><default>
+lcdd2 = port:PD02<3><0><default><default>
+lcdd3 = port:PD03<3><0><default><default>
+lcdd4 = port:PD04<3><0><default><default>
+lcdd5 = port:PD05<3><0><default><default>
+lcdd6 = port:PD06<3><0><default><default>
+lcdd7 = port:PD07<3><0><default><default>
+
+;----------------------------------------------------------------------------------
+;hdmi configuration
+;----------------------------------------------------------------------------------
+[hdmi_para]
+hdmi_used = 1
+
+
+
+;--------------------------------------------------------------------------------
+;vip (video input port) configuration
+;vip_used: 0:disable 1:enable
+;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one
buffer
+;vip_dev_qty: The quantity of devices linked to capture bus
+;vip_dev(x)_isp_used 0:not use isp 1:use isp
+;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
+;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at
standby
+;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
+;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
+;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
+;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
+;vip_dev(x)_avdd: camera module analog power handle string, pmu power
supply
+;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
+;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
+;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
+;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
+;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
+;x indicates the index of the devices which are linked to the same capture bus
+;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
+;fill handle string as below:
+;axp22_eldo3
+;axp22_dldo4
+;axp22_eldo2
+;fill handle string "" when not using any pmu power supply
+;--------------------------------------------------------------------------------
+
+[vip0_para]
+
+vip_used = 0
+vip_mode = 0
+vip_dev_qty = 1
+vip_vip_mck = port:PE16<2><default><default><default>
+
+vip_dev0_mname = "ov8825"
+vip_dev0_lane = 2
+vip_dev0_twi_id = 0
+vip_dev0_twi_addr = 0x6c
+vip_dev0_isp_used = 1
+vip_dev0_fmt = 1
+vip_dev0_stby_mode = 0
+vip_dev0_vflip = 0
+vip_dev0_hflip = 0
+vip_dev0_iovdd = "axp22_eldo3"
+vip_dev0_iovdd_vol = 2800000
+vip_dev0_avdd = "axp22_dldo4"
+vip_dev0_avdd_vol = 2800000
+vip_dev0_dvdd = "axp22_eldo2"
+vip_dev0_dvdd_vol = 1500000
+vip_dev0_afvdd = ""
+vip_dev0_afvdd_vol = 2800000
+vip_dev0_power_en = port:PH25<1><default><default><0>
+vip_dev0_reset = port:PH23<1><default><default><0>
+vip_dev0_pwdn = port:PH24<1><default><default><1>
+vip_dev0_flash_en = port:PA26<1><default><default><0>
+vip_dev0_flash_mode = port:PA27<1><default><default><0>
+vip_dev0_af_pwdn = port:PA24<1><default><default><0>
+
+vip_dev0_act_used = 1
+vip_dev0_act_name = "ad5820_act"
+vip_dev0_act_slave = 0x18
+
+
+vip_dev1_mname = ""
+vip_dev1_lane = 1
+vip_dev1_twi_id = 0
+vip_dev1_twi_addr =
+vip_dev1_isp_used = 0
+vip_dev1_fmt = 1
+vip_dev1_stby_mode = 0
+vip_dev1_vflip = 0
+vip_dev1_hflip = 0
+vip_dev1_iovdd = "axp22_eldo3"
+vip_dev1_iovdd_vol = 2800000
+vip_dev1_avdd = "axp22_dldo4"
+vip_dev1_avdd_vol = 2800000
+vip_dev1_dvdd = "axp22_eldo2"
+vip_dev1_dvdd_vol = 1500000
+vip_dev1_afvdd = ""
+vip_dev1_afvdd_vol = 2800000
+vip_dev1_power_en =
+vip_dev1_reset =
+vip_dev1_pwdn =
+vip_dev1_flash_en =
+vip_dev1_flash_mode =
+vip_dev1_af_pwdn =
+
+
+
+
+
+[vip1_para]
+
+vip_used = 0
+vip_mode = 0
+vip_dev_qty = 1
+vip_csi_pck = port:PE00<2><default><default><default>
+vip_csi_mck = port:PE01<2><default><default><default>
+vip_csi_hsync = port:PE02<2><default><default><default>
+vip_csi_vsync = port:PE03<2><default><default><default>
+vip_csi_d0 = port:PE04<2><default><default><default>
+vip_csi_d1 = port:PE05<2><default><default><default>
+vip_csi_d2 = port:PE06<2><default><default><default>
+vip_csi_d3 = port:PE07<2><default><default><default>
+vip_csi_d4 = port:PE08<2><default><default><default>
+vip_csi_d5 = port:PE09<2><default><default><default>
+vip_csi_d6 = port:PE10<2><default><default><default>
+vip_csi_d7 = port:PE11<2><default><default><default>
+vip_csi_d8 = port:PE12<2><default><default><default>
+vip_csi_d9 = port:PE13<2><default><default><default>
+vip_csi_d10 = port:PE14<2><default><default><default>
+vip_csi_d11 = port:PE15<2><default><default><default>
+
+vip_dev0_mname = "ov5647"
+vip_dev0_twi_id = 0
+vip_dev0_twi_addr = 0x6c
+vip_dev0_isp_used = 0
+vip_dev0_fmt = 0
+vip_dev0_stby_mode = 0
+vip_dev0_vflip = 0
+vip_dev0_hflip = 0
+vip_dev0_iovdd = "axp22_eldo3"
+vip_dev0_iovdd_vol = 2800000
+vip_dev0_avdd = "axp22_eldo3"
+vip_dev0_avdd_vol = 2800000
+vip_dev0_dvdd = "axp22_dldo4"
+vip_dev0_dvdd_vol = 1500000
+vip_dev0_afvdd = "axp22_eldo2"
+vip_dev0_afvdd_vol = 2800000
+vip_dev0_power_en = port:PA23<1><default><default><0>
+vip_dev0_reset = port:PA21<1><default><default><0>
+vip_dev0_pwdn = port:PA22<1><default><default><1>
+vip_dev0_flash_en =
+vip_dev0_flash_mode =
+vip_dev0_af_pwdn =
+
+
+vip_dev0_act_used = 1
+vip_dev0_act_name = "ad5820_act"
+vip_dev0_act_slave = 0x18
+
+
+vip_dev1_mname = ""
+vip_dev1_twi_id = 0
+vip_dev1_twi_addr =
+vip_dev1_stby_mode = 0
+vip_dev1_isp_used = 0
+vip_dev1_fmt = 1
+vip_dev1_vflip = 0
+vip_dev1_hflip = 0
+vip_dev1_iovdd = "axp22_eldo3"
+vip_dev1_iovdd_vol = 2800000
+vip_dev1_avdd = "axp22_dldo4"
+vip_dev1_avdd_vol = 2800000
+vip_dev1_dvdd = "axp22_eldo2"
+vip_dev1_dvdd_vol = 1500000
+vip_dev1_afvdd = ""
+vip_dev1_afvdd_vol = 2800000
+vip_dev1_power_en =
+vip_dev1_reset =
+vip_dev1_pwdn =
+vip_dev1_flash_en =
+vip_dev1_flash_mode =
+vip_dev1_af_pwdn =
+
+[camera_list_para]
+camera_list_para_used = 0
+ov7670 = 0
+gc0308 = 1
+gt2005 = 0
+hi704 = 0
+sp0838 = 0
+mt9m112 = 0
+mt9m113 = 0
+gc2035 = 1
+ov2655 = 0
+hi253 = 0
+gc0307 = 1
+mt9d112 = 0
+ov5640 = 1
+ov5647 = 1
+gc2015 = 0
+ov2643 = 0
+gc0329 = 0
+gc0309 = 0
+tvp5150 = 0
+s5k4ec = 0
+ov5650_mv9335 = 0
+siv121d = 0
+;--------------------------------------------------------------------------------
+;tv configuration
+;
+;--------------------------------------------------------------------------------
+[tvout_para]
+tvout_used =
+tvout_channel_num =
+tv_en =
+
+[tvin_para]
+tvin_used =
+tvin_channel_num =
+
+;--------------------------------------------------------------------------------
+; SDMMC PINS MAPPING
|
+;
------------------------------------------------------------------------------|
+; Config Guide
|
+; sdc_used: 1-enable card, 0-disable card
|
+; sdc_detmode: card detect mode
|
+; 1-detect card by gpio polling
|
+; 2-detect card by gpio irq(must use IO with irq function)
|
+; 3-no detect, always in for boot card
|
+; 4-manually insert and remove by
/proc/driver/sunxi-mmc.x/insert|
+; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit
|
+; sdc_use_wp: 1-with write protect IO, 0-no write protect IO
|
+; sdc_isio: for sdio card
|
+; sdc_regulator: power control.if card supports UHS-I/DDR and HS200 timing
for|
+; SD3.0 or eMMC4.5, regulator must be configured. the value
is |
+; the ldo name of AXP221, eg: sdc_regulator = "axp22_eldo2"
|
+; other: GPIO Mapping configuration
|
+;
------------------------------------------------------------------------------|
+; Note:
|
+; 1 if detmode=2, sdc_det's config=6
|
+; else if detmode=1, sdc_det's config=0
|
+; else sdc_det IO is not necessary
|
+; 2 if the customer wants to support UHS-I and HS200 features, he must
provide|
+; an independent power supply for the card. This is only used in platforms
|
+; that supports SD3.0 cards and eMMC4.4+ flashes
|
+;--------------------------------------------------------------------------------
+[mmc0_para]
+sdc_used = 1
+sdc_detmode = 1
+sdc_buswidth = 4
+sdc_clk = port:PF02<2><1><2><default>
+sdc_cmd = port:PF03<2><1><2><default>
+sdc_d0 = port:PF01<2><1><2><default>
+sdc_d1 = port:PF00<2><1><2><default>
+sdc_d2 = port:PF05<2><1><2><default>
+sdc_d3 = port:PF04<2><1><2><default>
+sdc_det = port:PH22<0><1><default><default>
+sdc_use_wp = 0
+sdc_wp =
+sdc_isio = 0
+sdc_regulator = "none"
+
+[mmc1_para]
+sdc_used = 0
+sdc_detmode = 4
+sdc_buswidth = 4
+sdc_clk = port:PG00<2><1><2><default>
+sdc_cmd = port:PG01<2><1><2><default>
+sdc_d0 = port:PG02<2><1><2><default>
+sdc_d1 = port:PG03<2><1><2><default>
+sdc_d2 = port:PG04<2><1><2><default>
+sdc_d3 = port:PG05<2><1><2><default>
+sdc_det =
+sdc_use_wp = 0
+sdc_wp =
+sdc_isio = 1
+sdc_regulator = "none"
+
+[mmc2_para]
+sdc_used = 0
+sdc_detmode = 3
+sdc_buswidth = 8
+sdc_clk = port:PC07<3><1><2><default>
+sdc_cmd = port:PC06<3><1><2><default>
+sdc_d0 = port:PC08<3><1><2><default>
+sdc_d1 = port:PC09<3><1><2><default>
+sdc_d2 = port:PC10<3><1><2><default>
+sdc_d3 = port:PC11<3><1><2><default>
+sdc_d4 = port:PC12<3><1><2><default>
+sdc_d5 = port:PC13<3><1><2><default>
+sdc_d6 = port:PC14<3><1><2><default>
+sdc_d7 = port:PC15<3><1><2><default>
+emmc_rst = port:PC24<3><1><2><default>
+sdc_det =
+sdc_use_wp = 0
+sdc_wp =
+sdc_isio = 0
+sdc_regulator = "none"
+
+[mmc3_para]
+sdc_used = 0
+sdc_detmode = 2
+sdc_buswidth = 4
+sdc_clk = port:PA10<2><1><2><default>
+sdc_cmd = port:PA09<2><1><2><default>
+sdc_d0 = port:PA11<2><1><2><default>
+sdc_d1 = port:PA12<2><1><2><default>
+sdc_d2 = port:PA13<2><1><2><default>
+sdc_d3 = port:PA14<2><1><2><default>
+sdc_det =
+sdc_use_wp = 0
+sdc_wp =
+sdc_isio = 0
+sdc_regulator = "none"
+
+;
------------------------------------------------------------------------------|
+; sim card configuration
+;--------------------------------------------------------------------------------
+[smc_para]
+smc_used =
+smc_rst =
+smc_vppen =
+smc_vppp =
+smc_det =
+smc_vccen =
+smc_sck =
+smc_sda =
+
+
+;--------------------------------
+;[usbc0]：控制器0的配置。
+;usb_used：USB使能标志。置1，表示系统中USB模块可用,置0,则表示系统USB禁用。
+;usb_port_type：USB端口的使用情况。 0：device only;1：host only;2：OTG
+;usb_detect_type：USB端口的检查方式。0：不做检测;1：vbus/id检查;2：id/dpdm检查
+;usb_id_gpio：USB ID pin脚配置。具体请参考gpio配置说明。
+;usb_det_vbus_gpio：USB DET_VBUS pin脚配置。具体请参考gpio配置说明。
+;usb_drv_vbus_gpio：USB DRY_VBUS pin脚配置。具体请参考gpio配置说明。
+;usb_det_vbus_gpio: "axp_ctrl",表示axp 提供
+;usb_restrict_gpio usb限流控制pin
+;usb_restric_flag: usb限流标置
+;usb_not_suspend: usb远程唤醒标置，0：不支持，1：支持
+;--------------------------------
+;--------------------------------
+;--- USB0控制标志
+;--------------------------------
+[usbc0]
+usb_used = 1
+usb_port_type = 0
+usb_detect_type = 0
+usb_id_gpio =
+usb_det_vbus_gpio =
+usb_drv_vbus_gpio =
+usb_restrict_gpio = port:PH26<1><0><default><0>
+usb_host_init_state = 0
+usb_restric_flag = 0
+usb_restric_voltage = 3550000
+usb_restric_capacity= 5
+;--------------------------------
+;--- USB1控制标志
+;--------------------------------
+[usbc1]
+usb_used = 1
+usb_port_type = 1
+usb_detect_type = 0
+usb_id_gpio =
+usb_det_vbus_gpio =
+usb_drv_vbus_gpio = port:PC27<1><0><default><0>
+usb_restrict_gpio = port:PH26<1><0><default><0>
+usb_host_init_state = 1
+usb_restric_flag = 0
+usb_not_suspend = 0
+
+;--------------------------------
+;--- USB2控制标志
+;--------------------------------
+[usbc2]
+usb_used = 1
+usb_port_type = 1
+usb_detect_type = 0
+usb_id_gpio =
+usb_det_vbus_gpio =
+usb_drv_vbus_gpio =
+usb_restrict_gpio =
+usb_host_init_state = 0
+usb_restric_flag = 0
+usb_not_suspend = 0
+
+;--------------------------------
+;--- USB Device
+;--------------------------------
+[usb_feature]
+vendor_id = 0x18D1
+mass_storage_id = 0x0001
+adb_id = 0x0002
+
+manufacturer_name = "USB Developer"
+product_name = "Android"
+serial_number = "20080411"
+
+[msc_feature]
+vendor_name = "USB 2.0"
+product_name = "USB Flash Driver"
+release = 100
+luns = 3
+
+;--------------------------------------------------------------------------------
+; G sensor configuration
+; gs_twi_id --- TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2)
+;--------------------------------------------------------------------------------
+[gsensor_para]
+gsensor_used = 0
+gsensor_twi_id = 2
+gsensor_twi_addr = 0x18
+gsensor_int1 = port:PA09<6><1><default><default>
+gsensor_int2 =
+
+;--------------------------------------------------------------------------------
+; gps gpio configuration
+; gps_spi_id --- the index of SPI controller. 0: SPI0, 1: SPI1, 2:
SPI2, 15: no SPI used
+; gps_spi_cs_num --- the chip select number of SPI controller. 0: SPI
CS0, 1: SPI CS1
+; gps_lradc --- the lradc number for GPS used. 0 and 1 is
valid, set 2 if not use lradc
+;--------------------------------------------------------------------------------
+[gps_para]
+
+;--------------------------------------------------------------------------------
+;wifi configuration
+;wifi_sdc_id --- 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
+;wifi_usbc_id --- 0- USB0, 1- USB1, 2- USB2
+;wifi_usbc_type -- 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
+;wifi_mod_sel --- 0- none, 1- ap6181, 2- ap6210(wifi+bt),
+; 3 - rtl8723as(wifi+bt), 4- rtl8189es(SM89E00),
+; 5 - rtl8192cu, 6 - rtl8188eu, 7 - mt6620,
+; 8 - rtl8723au, 9 - ap6330(wifi+bt+fm)
+;--------------------------------------------------------------------------------
+[wifi_para]
+wifi_used = 1
+wifi_sdc_id = 1
+wifi_usbc_id = 2
+wifi_usbc_type = 1
+wifi_mod_sel = 6
+wifi_power = "axp22_aldo1"
+
+; 1 - ap6181 sdio wifi gpio config
+;ap6xxx_wl_regon = port:PM00<1><default><default><0>
+;ap6xxx_wl_host_wake = port:PM01<0><default><default><0>
+
+; 2 - ap6210 sdio wifi gpio config
+;ap6xxx_wl_regon = port:PM00<1><default><default><0>
+;ap6xxx_wl_host_wake = port:PM01<0><default><default><0>
+;ap6xxx_bt_regon = port:PM03<1><default><default><0>
+;ap6xxx_bt_wake = port:PG12<1><default><default><0>
+;ap6xxx_bt_host_wake = port:PM04<0><default><default><0>
+
+; 3 - rtl8723as sdio wifi + bt gpio config
+rtk_rtl8723as_wl_dis = port:PG10<1><default><default><0>
+rtk_rtl8723as_bt_dis = port:PG11<1><default><default><0>
+rtk_rtl8723as_wl_host_wake = port:PG12<0><default><default><0>
+rtk_rtl8723as_bt_host_wake = port:PG17<0><default><default><0>
+
+; 4 - rtl8189es sdio wifi gpio config
+;rtl8189es_shdn = port:PG10<1><default><default><0>
+;rtl8189es_wakeup = port:PG12<1><default><default><1>
+
+; 5 - rtl8192cu usb wifi
+
+; 6 - rtl8188eu usb wifi
+
+; 7 - mt6620 sdio+uart wifi+bt+gps+fm gpio config
+;mtk_6620_ldo = port:PL04<1><default><default><0>
+;mtk_6620_pmu_en = port:PL05<1><default><default><0>
+;mtk_6620_sys_rst = port:PL08<1><default><default><0>
+;mtk_6620_wifi_int = port:PL06<6><1><default><default>
+;mtk_6620_bgf_int = port:PL07<6><1><default><default>
+
+; 8 - rtl8723au usb wifi + bt
+
+; 9 - ap6330 sdio wifi gpio config
+;ap6xxx_wl_regon = port:PM00<1><default><default><0>
+;ap6xxx_wl_host_wake = port:PM01<0><default><default><0>
+;ap6xxx_bt_regon = port:PM03<1><default><default><0>
+;ap6xxx_bt_wake = port:PG12<1><default><default><0>
+;ap6xxx_bt_host_wake = port:PM04<0><default><default><0>
+
+;--------------------------------------------------------------------------------
+;3G configuration
+;--------------------------------------------------------------------------------
+[3g_para]
+3g_used = 0
+3g_usbc_num = 2
+3g_uart_num = 0
+bb_vbat = port:PL03<1><default><default><0>
+bb_host_wake = port:PM00<1><default><default><0>
+bb_on = port:PM01<1><default><default><0>
+bb_pwr_on = port:PM03<1><default><default><0>
+bb_wake = port:PM04<1><default><default><0>
+bb_rf_dis = port:PM05<1><default><default><0>
+bb_rst = port:PM06<1><default><default><0>
+3g_int =
+
+;--------------------------------------------------------------------------------
+;gyroscope
+;--------------------------------------------------------------------------------
+[gy_para]
+gy_used = 1
+gy_twi_id = 2
+gy_twi_addr = 0x6a
+gy_int1 = port:PA10<6><1><default><default>
+gy_int2 =
+
+;--------------------------------------------------------------------------------
+;light sensor
+;--------------------------------------------------------------------------------
+[ls_para]
+ls_used = 1
+ls_twi_id = 2
+ls_twi_addr = 0x23
+ls_int = port:PA12<6><1><default><default>
+
+;--------------------------------------------------------------------------------
+;compass
+;--------------------------------------------------------------------------------
+[compass_para]
+compass_used = 1
+compass_twi_id = 2
+compass_twi_addr = 0x0d
+compass_int = port:PA11<6><1><default><default>
+
+;--------------------------------------------------------------------------------
+;blue tooth
+;bt_used ---- blue tooth used (0- no used, 1- used)
+;bt_uard_id ---- uart index
+;--------------------------------------------------------------------------------
+[bt_para]
+bt_used = 1
+bt_uart_id =
+bt_wakeup =
+bt_gpio =
+bt_rst =
+
+;--------------------------------------------------------------------------------
+;i2s_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
+; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master)
not use
+; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame
slave) not use
+; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave)
use
+;i2s_select:0 is pcm.1 is i2s
+;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
+; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
+; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
+; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd
BCLK rising edge after LRC rising edge). use
+; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd
BCLK rising edge after LRC rising edge)
+;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
+; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
+; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM)
use
+; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
+;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
+;sample_resolution :16bits/20bits/24bits
+;word_select_size :16bits/20bits/24bits/32bits
+;pcm_sync_period :16/32/64/128/256
+;msb_lsb_first :0: msb first; 1: lsb first
+;sign_extend :0: zero pending; 1: sign extend
+;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
+;slot_width :8 bit width / 16 bit width
+;frame_width :0: long frame = 2 clock width; 1: short frame
+;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit
u-law; 3: 8bit a-law
+;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit
u-law; 3: 8bit a-law
+;--------------------------------------------------------------------------------
+[i2s_para]
+i2s_used = 1
+i2s_channel = 2
+i2s_master = 1
+i2s_select = 0
+audio_format = 4
+signal_inversion = 3
+over_sample_rate = 256
+sample_resolution = 16
+word_select_size = 32
+pcm_sync_period = 256
+msb_lsb_first = 0
+sign_extend = 0
+slot_index = 0
+slot_width = 16
+frame_width = 1
+tx_data_mode = 0
+rx_data_mode = 0
+i2s_mclk =
+i2s_bclk = port:PB01<2><1><default><default>
+i2s_lrclk = port:PB02<2><1><default><default>
+i2s_dout0 = port:PB03<2><1><default><default>
+i2s_dout1 =
+i2s_dout2 =
+i2s_dout3 =
+i2s_din = port:PB07<2><1><default><default>
+
+;--------------------------------------------------------------------------------
+;pcm_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
+; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master)
not use
+; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame
slave) not use
+; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave)
use
+;pcm_select:1 is pcm.0 is i2s
+;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
+; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
+; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
+; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd
BCLK rising edge after LRC rising edge). use
+; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd
BCLK rising edge after LRC rising edge)
+;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
+; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
+; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM)
use
+; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
+;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
+;sample_resolution :16bits/20bits/24bits
+;word_select_size :16bits/20bits/24bits/32bits
+;pcm_sync_period :16/32/64/128/256
+;msb_lsb_first :0: msb first; 1: lsb first
+;sign_extend :0: zero pending; 1: sign extend
+;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
+;slot_width :8 bit width / 16 bit width
+;frame_width :0: long frame = 2 clock width; 1: short frame
+;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit
u-law; 3: 8bit a-law
+;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit
u-law; 3: 8bit a-law
+;--------------------------------------------------------------------------------
+[pcm_para]
+pcm_used = 1
+pcm_channel = 2
+pcm_master = 4
+pcm_select = 1
+audio_format = 4
+signal_inversion = 3
+over_sample_rate = 512
+sample_resolution = 16
+word_select_size = 32
+pcm_sync_period = 64
+msb_lsb_first = 0
+sign_extend = 0
+slot_index = 0
+slot_width = 16
+frame_width = 1
+tx_data_mode = 0
+rx_data_mode = 0
+pcm_mclk =
+pcm_bclk = port:PG13<3><1><default><default>
+pcm_lrclk = port:PG14<3><1><default><default>
+pcm_dout = port:PG16<3><1><default><default>
+pcm_din = port:PG15<3><1><default><default>
+
+[spdif_para]
+spdif_used = 1
+spdif_dout = port:PH28<3><1><default><default>
+spdif_din = port:PH27<3><1><default><default>
+
+;--------------------------------------------------------------------------------
+;pa_single_vol,pa_double_vol: 31 level,1.5db/step.0x1f is the large volume.
+;cap_vol:use for system
record,0x0--0db,0x1--24db,0x2--27db,0x3--30db,0x4--33db,0x5--36db,0x6--39db,0x7--42db
+;headphone_vol,earpiece_vol: must least than 0x3b. 0x1 is a step.
+;headset_mic_vol: headset mic(mic2) vol,use for phone headset mic call
+;main_mic_vol: main mic(mic1) vol,use for phone main mic call
+;--------------------------------------------------------------------------------
+[audio_para]
+audio_used = 1
+audio_hp_ldo = "none"
+headphone_vol = 0x3b
+earpiece_vol = 0x3b
+cap_vol = 0x5
+pa_single_vol = 0x19
+pa_double_used = 0
+pa_double_vol = 0x1f
+headphone_direct_used = 0
+headphone_mute_used = 0
+audio_pa_ctrl = port:PL02<1><default><default><0>
+audio_mute_ctrl =
+headset_mic_vol = 6
+main_mic_vol = 6
+
+;----------------------------------------------------------------------------------
+;ir --- infra remote configuration
+;----------------------------------------------------------------------------------
+[ir_para]
+ir_used = 1
+ir_rx = port:PL04<2><1><default><default>
+ir_power_key_code =
+
+[axp_para]
+axp_num = 1
+axp_0 = "axp22_dldo4"
+;axp_1 = "axp22_dldo1"
+
+;----------------------------------------------------------------------------------
+;gpio configuration
+;----------------------------------------------------------------------------------
+[gpio_para]
+gpio_used = 1
+gpio_pin_1 = port:PH13<1><default><default><1>
+gpio_pin_2 = port:PH24<1><default><2><0>
+
+;-------------------------------------------------------------------------------------
+;pmu_used ---0:not used,1:used
+;pmu_twi_addr ---slave address
+;pmu_twi_id ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3)
+;pmu_irq_id ---irq number (0 irq0,1 irq1,……)
+;pmu_battery_rdc ---battery initial resistance
+;pmu_battery_cap ---battery capability,mAh
+;pmu_batdeten ---battery detect en;0:disable 1:enable
+;pmu_runtime_chgcur ---set initial charging current
limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
+;pmu_earlysuspend_chgcur ---set earlysuspend charging current
limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
+;pmu_suspend_chgcur ---set suspend charging current
limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
+;pmu_shutdown_chgcur ---set shutdown charging current
limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
+;pmu_init_chgvol ---set initial charing target
voltage,mV,4100/4220/4200/4240
+;pmu_init_chgend_rate ---set initial charing end current rate,10/15
+;pmu_init_chg_enabled ---set initial charing enabled,0:disable,1:enable
+;pmu_init_adc_freq ---set initial adc frequency,Hz,100/200/400/800
+;pmu_init_adcts_freq ---set initial adc TS,Hz,100/200/400/800
+;pmu_init_chg_pretime ---set initial pre-charging time,min,40/50/60/70
+;pmu_init_chg_csttime ---set initial constance-charging
time,min,360/480/600/720
+;pmu_batt_cap_correct ---correct the battery capacity or not when one
charge cycle 0:not correct 1:correct
+;pmu_bat_regu_en ---bat regulator is enable or not when
charge done 0:disable 1:enable
+;pmu_bat_para1 ---battery indication
at 3.13V
+;pmu_bat_para2 ---battery indication at 3.27V
+;pmu_bat_para3 ---battery indication at 3.34V
+;pmu_bat_para4 ---battery indication at 3.41V
+;pmu_bat_para5 ---battery indication at 3.48V
+;pmu_bat_para6 ---battery indication at 3.52V
+;pmu_bat_para7 ---battery indication at 3.55V
+;pmu_bat_para8 ---battery indication at 3.57V
+;pmu_bat_para9 ---battery indication at 3.59V
+;pmu_bat_para10 ---battery indication at 3.61V
+;pmu_bat_para11 ---battery indication at 3.63V
+;pmu_bat_para12 ---battery indication at 3.64V
+;pmu_bat_para13 ---battery indication at 3.66V
+;pmu_bat_para14 ---battery indication at 3.7V
+;pmu_bat_para15 ---battery indication at 3.73V
+;pmu_bat_para16 ---battery indication at 3.77V
+;pmu_bat_para17 ---battery indication at 3.78V
+;pmu_bat_para18 ---battery indication at 3.8V
+;pmu_bat_para19 ---battery indication at 3.82V
+;pmu_bat_para20 ---battery indication at 3.84V
+;pmu_bat_para21 ---battery indication at 3.85V
+;pmu_bat_para22 ---battery indication at 3.87V
+;pmu_bat_para23 ---battery indication at 3.91V
+;pmu_bat_para24 ---battery indication at 3.94V
+;pmu_bat_para25 ---battery indication at 3.98V
+;pmu_bat_para26 ---battery indication at 4.01V
+;pmu_bat_para27 ---battery indication at 4.05V
+;pmu_bat_para28 ---battery indication at 4.08V
+;pmu_bat_para29 ---battery indication at 4.1V
+;pmu_bat_para30 ---battery indication at 4.12V
+;pmu_bat_para31 ---battery indication at 4.14V
+;pmu_bat_para32 ---battery indication at 4.15V
+;pmu_usbvol_limit ---set usb-ac limited voltage
enable,1:enable，0：disable
+;pmu_usbcur_limit ---set usb-ac limited current
enable,1:enable，0：disable
+;pmu_usbvol ---set usb-ac limited voltage
level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
+;pmu_usbcur ---set usb-ac limited current level,mA,500/900, 0
- not limite
+;pmu_usbvol_pc ---set usb-pc limited voltage
level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
+;pmu_usbcur_pc ---set usb-pc limited current level,mA,500/900, 0
- not limite
+;pmu_pwroff_vol ---set protect voltage when system start
up,mV,2600/2700/2800/2900/3000/3100/3200/3300
+;pmu_pwron_vol ---set protect voltage after system start
up,mV,2600/2700/2800/2900/3000/3100/3200/3300
+;pmu_pekoff_time ---set pek off time,ms, 4000/6000/8000/10000
+;pmu_pekoff_func ---set pek off func, 0:shutdown,1:restart
+;pmu_pekoff_en ---set pek offlevel powerdown or not, 0:not
powerdown,1:powerdown
+;pmu_peklong_time ---set pek pek long irq
time,ms,1000/1500/2000/2500
+;pmu_pekon_time ---set pek on time,ms,128/1000/2000/3000
+;pmu_pwrok_time ---set pmu pwrok delay time,ms,8/16/32/64
+;pmu_battery_warning_level1 ---low power warning high level,5%-20%,1%/step
+;pmu_battery_warning_level2 ---low power warning low level,0%-15%,1%/step
+;pmu_restvol_time ---battery indicaton reflash time,30/60/120/
+;pmu_ocv_cou_adjust_time ---ocv battery indication reflash time,60/120/30
+;pmu_chgled_func ---CHGKED pin control，0:controlled by
pmu,1:controlled by Charger
+;pmu_chgled_type ---CHGLED Type select when
pmu_chgled_func=0,0:Type A，1：Type B
+;pmu_vbusen_func ---N_VBUSEN function select,0:as an output,1:as an
input
+;pmu_reset ---when power key press longer than 16's,PMU
reset or not.0:not reset 1:reset
+;pmu_IRQ_wakeup ---press IRQ wakeup or not when sleep or
power down.0:not wakeup 1:wakeup
+;pmu_hot_shutdowm ---when PMU over temperature protect or
not;0:disable 1:enable
+;pmu_inshort ---ACIN and VBUS inshort or not by software;0:auto
detect 1:inshort
+;--------------------------------------------------------------------------------------------------------
+[pmu_para]
+pmu_used = 1
+pmu_twi_addr = 0x34
+pmu_twi_id = 1
+pmu_irq_id = 0
+pmu_battery_rdc = 100
+pmu_battery_cap = 0
+pmu_batdeten = 1
+pmu_runtime_chgcur = 900
+pmu_earlysuspend_chgcur = 900
+pmu_suspend_chgcur = 1500
+pmu_shutdown_chgcur = 1500
+pmu_init_chgvol = 4200
+pmu_init_chgend_rate = 15
+pmu_init_chg_enabled = 1
+pmu_init_adc_freq = 800
+pmu_init_adcts_freq = 800
+pmu_init_chg_pretime = 70
+pmu_init_chg_csttime = 720
+pmu_batt_cap_correct = 1
+pmu_bat_regu_en = 0
+
+pmu_bat_para1 = 0
+pmu_bat_para2 = 0
+pmu_bat_para3 = 0
+pmu_bat_para4 = 0
+pmu_bat_para5 = 0
+pmu_bat_para6 = 0
+pmu_bat_para7 = 0
+pmu_bat_para8 = 0
+pmu_bat_para9 = 5
+pmu_bat_para10 = 8
+pmu_bat_para11 = 9
+pmu_bat_para12 = 10
+pmu_bat_para13 = 13
+pmu_bat_para14 = 16
+pmu_bat_para15 = 20
+pmu_bat_para16 = 33
+pmu_bat_para17 = 41
+pmu_bat_para18 = 46
+pmu_bat_para19 = 50
+pmu_bat_para20 = 53
+pmu_bat_para21 = 57
+pmu_bat_para22 = 61
+pmu_bat_para23 = 67
+pmu_bat_para24 = 73
+pmu_bat_para25 = 78
+pmu_bat_para26 = 84
+pmu_bat_para27 = 88
+pmu_bat_para28 = 92
+pmu_bat_para29 = 93
+pmu_bat_para30 = 94
+pmu_bat_para31 = 95
+pmu_bat_para32 = 100
+
+pmu_usbvol_limit = 0
+pmu_usbcur_limit = 0
+pmu_usbvol = 4000
+pmu_usbcur = 0
+pmu_usbvol_pc = 4400
+pmu_usbcur_pc = 500
+pmu_pwroff_vol = 3300
+pmu_pwron_vol = 2600
+pmu_pekoff_time = 6000
+pmu_pekoff_func = 1
+pmu_pekoff_en = 1
+pmu_peklong_time = 1000
+pmu_pekon_time = 128
+pmu_pwrok_time = 64
+pmu_battery_warning_level1 = 3
+pmu_battery_warning_level2 = 0
+pmu_restvol_adjust_time = 60
+pmu_ocv_cou_adjust_time = 60
+pmu_chgled_func = 0
+pmu_chgled_type = 0
+pmu_vbusen_func = 1
+pmu_reset = 0
+pmu_IRQ_wakeup = 0
+pmu_hot_shutdowm = 1
+pmu_inshort = 0
+power_start = 1
+
+;----------------------------------------------------------------------------------
+; dvfs voltage-frequency table configuration
+;
+; max_freq: cpu maximum frequency, based on Hz, can not be more than 1008MHz
+; min_freq: cpu minimum frequency, based on Hz, can not be less than 96MHz
+;
+; LV_count: count of LV_freq/LV_volt, must be < 16
+;
+; LV1: core vdd is 1.26v if cpu frequency is (1104Mhz, xxxxMhz]
+; LV2: core vdd is 1.26v if cpu frequency is (1056Mhz, 1104Mhz]
+; LV3: core vdd is 1.20v if cpu frequency is (864Mhz, 1056Mhz]
+; LV4: core vdd is 1.10v if cpu frequency is (720Mhz, 864Mhz]
+; LV5: core vdd is 1.00v if cpu frequency is (480Mhz, 720Mhz]
+; LV6: core vdd is 0.90v if cpu frequency is (0Mhz, 480Mhz]
+; LV7: core vdd is 0.90v if cpu frequency is (0Mhz, 480Mhz]
+; LV8: core vdd is 0.90v if cpu frequency is (0Mhz, 480Mhz]
+;
+;----------------------------------------------------------------------------------
+[dvfs_table]
+max_freq = 1008000000
+min_freq = 120000000
+
+LV_count = 8
+
+LV1_freq = 1104000000
+LV1_volt = 1300
+
+LV2_freq = 1056000000
+LV2_volt = 1260
+
+LV3_freq = 864000000
+LV3_volt = 1200
+
+LV4_freq = 720000000
+LV4_volt = 1100
+
+LV5_freq = 480000000
+LV5_volt = 1000
+
+LV6_freq = 0
+LV6_volt = 1000
+
+LV7_freq = 0
+LV7_volt = 1000
+
+LV8_freq = 0
+LV8_volt = 1000
+
+;----------------------------------------------------------------------------------
+;cpus config parameters
+;cpus_uart_debug_used --r_uart whether used for cpus debugging
+;
+;----------------------------------------------------------------------------------
+[cpus_config_paras]
+cpus_uart_debug_used = 1
+
+;----------------------------------------------------------------------------------
+;boot display configuration
+;output_type (0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga)
+;output_mode (used for tv/hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50
5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60 11:pal 14:ntsc)
+;output_mode (used for vga output, 0:1680*1050 1:1440*900 2:1360*768
3:1280*1024 4:1024*768 5:800*600 6:640*480 10:1920*1080 11:1280*720)
+;auto_hpd (auto detect hdmi/cvbs/ypbpr plug in)
+;----------------------------------------------------------------------------------
+[boot_disp]
+output_type = 3
+output_mode = 5
+auto_hpd = 1
--
1.9.1
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
