Hi Antonio, Do you have power on the M2 USB?, could you please upload a working SD image for M2? Thank you in advanced. Regards. Jorge Pérez.
El martes, 18 de marzo de 2014 20:25:03 UTC+1, [email protected] escribió: > > Hi Marcos, > > I get my boards booting with a Linaro and with HDMI output. I think that > the problem is in your FEX file configuration. You have configured the > output type to LCD and not HDMI. > > Change the values of the following parameters to the values below, > regenerated your script.bin and try again : > > [disp_init] > disp_init_enable = 1 > disp_mode = 0 > screen0_output_type = 3 > screen0_output_mode = 4 > screen1_output_type = 0 > screen1_output_mode = 4 > > Reference : http://linux-sunxi.org/Fex_Guide#disp_init_configuration > > Now I am working on the ethernet and SATA drivers. > > Regards, > Antonio Belloni > > > Em sexta-feira, 14 de fevereiro de 2014 16h00min39s UTC-2, Marcos Cruz > escreveu: >> >> Hi, >> >> >> This is a digital signage board based on A20 SoC, here the website: >> http://www.merrii.com/en/detail.asp?id=157 >> I managed to modify and install the Cubian distribution to function >> on it but >> I'm having problems with its VGA and HDMI outputs (no signal). >> The file dmesg_output contains the kernel output. >> What is curious about the board is I had to modify script.fex file in >> order to make >> the built in rtl8188etv operational but with the Android that comes >> pre-installed everything works. >> Have anyone any idea about the VGA and HDMI outputs? >> >> >> Regards, >> >> >> Marcos >> > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
