Hi, This series enables the uart and i2c controller found on the A80 Optimus board's gpio expansion header, as well as 2 out of 3 onboard LEDs. The last LED needs R_PIO support.
This series contains only changes to the dtsi and dts files, and is based on Maxime's pinctrl driver series. The patches should be self-explanatory. Changes since v1: - Dropped a80_ prefix on the led labels - Fixed mapping for leds to pins, previously led2 and led4 were reversed. - Use dash instead of underscore in led-pins DT node name Cheers, ChenYu Chen-Yu Tsai (6): ARM: dts: sun9i: Add i2c controller nodes to a80 dtsi ARM: dts: sun9i: Add i2c3 pinmux setting for A80 SoC ARM: dts: sun9i: Enable i2c3 on A80 Optimus board ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board ARM: dts: sun9i: Add uart4 pinmux setting for A80 SoC ARM: dts: sun9i: Enable uart4 for A80 Optimus board arch/arm/boot/dts/sun9i-a80-optimus.dts | 51 ++++++++++++++++++++++++ arch/arm/boot/dts/sun9i-a80.dtsi | 69 +++++++++++++++++++++++++++++++++ 2 files changed, 120 insertions(+) -- 2.1.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.