Hello Dmitry, Thank you for comments. I'll implement these comments and resend it for review.
On Thursday, December 4, 2014, Dmitry Torokhov <[email protected]> wrote: > On Thu, Dec 04, 2014 at 04:23:44AM +0530, vishnupatekar wrote: > > --- > > drivers/input/serio/Kconfig | 9 ++ > > drivers/input/serio/Makefile | 1 + > > drivers/input/serio/sunxi-ps2.c | 305 > +++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 315 insertions(+) > > create mode 100644 drivers/input/serio/sunxi-ps2.c > > > > diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig > > index bc2d474..1a86e41 100644 > > --- a/drivers/input/serio/Kconfig > > +++ b/drivers/input/serio/Kconfig > > @@ -281,4 +281,13 @@ config HYPERV_KEYBOARD > > To compile this driver as a module, choose M here: the module > will > > be called hyperv_keyboard. > > > > +config SERIO_SUNXI_PS2 > > + tristate "Allwinner Sun7i-A20 PS/2 controller" > > + default m > > Why default m? Default should be n. Also it seems it has to depend on > OF. And what about depending on <arch> || COMPILE_TEST? > > > + help > > + Say Y here if you have Sun7i-A20 Allwinner PS/2 ports. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called sunxi-ps2. > > + > > endif > > diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile > > index 815d874..0fa0f78 100644 > > --- a/drivers/input/serio/Makefile > > +++ b/drivers/input/serio/Makefile > > @@ -29,3 +29,4 @@ obj-$(CONFIG_SERIO_ARC_PS2) += arc_ps2.o > > obj-$(CONFIG_SERIO_APBPS2) += apbps2.o > > obj-$(CONFIG_SERIO_OLPC_APSP) += olpc_apsp.o > > obj-$(CONFIG_HYPERV_KEYBOARD) += hyperv-keyboard.o > > +obj-$(CONFIG_SERIO_SUNXI_PS2) += sunxi-ps2.o > > diff --git a/drivers/input/serio/sunxi-ps2.c > b/drivers/input/serio/sunxi-ps2.c > > new file mode 100644 > > index 0000000..ccd7b29 > > --- /dev/null > > +++ b/drivers/input/serio/sunxi-ps2.c > > @@ -0,0 +1,305 @@ > > +/* > > + * sunxi-ps2.c Support for Allwinner A20 PS2 host controller > > No file names in sources please. > > > + * > > + * Author: Aaron.maoye <[email protected] <javascript:;>> > > + * Vishnu Patekar <[email protected] <javascript:;>> > > + * Based on sunxi-ps2.c 3.0 kernel > > + * > > +*/ > > + > > +#include <linux/module.h> > > +#include <linux/serio.h> > > +#include <linux/interrupt.h> > > +#include <linux/errno.h> > > +#include <linux/slab.h> > > +#include <linux/list.h> > > +#include <linux/io.h> > > +#include <linux/of_address.h> > > +#include <linux/of_device.h> > > +#include <linux/of_irq.h> > > +#include <linux/of_platform.h> > > +#include <linux/clk.h> > > +#include <linux/delay.h> > > + > > +#define DRIVER_NAME "sunxi-ps2" > > + > > +#define RESSIZE(res) (((res)->end - (res)->start)+1) > > I am sure we have something generic for it, no? > > > + > > +#define SW_PS2_GCTRL (0x00) > > +#define SW_PS2_DATA (0x04) > > +#define SW_PS2_LCTRL (0x08) > > +#define SW_PS2_LSTAT (0x0c) > > +#define SW_PS2_FCTRL (0x10) > > +#define SW_PS2_FSTAT (0x14) > > +#define SW_PS2_CLKDR (0x18) > > + > > +/* SW_PS2_GCTRL */ > > +#define SWPS2_BUSEN (1 << 0) > > +#define SWPS2_MASTER (1 << 1) > > +#define SWPS2_RESET (1 << 2) > > +#define SWPS2_INTEN (1 << 3) > > +#define SWPS2_INTFLAG (1 << 3) > > + > > +/* SW_PS2_LCTRL */ > > +#define SWPS2_LCTL_NOACK (0x0 << 18) > > +#define SWPS2_LCTL_TXDTOEN (0x1 << 8) > > +#define SWPS2_LCTL_STOPERREN (0x1 << 3) > > +#define SWPS2_LCTL_ACKERREN (0x1 << 2) > > +#define SWPS2_LCTL_PARERREN (0x1 << 1) > > +#define SWPS2_LCTL_RXDTOEN (0x1 << 0) > > + > > +/* SW_PS2_FSTAT */ > > +#define SWPS2_FSTA_RXRDY (1 << 0) > > +#define SWPS2_FSTA_RXOF (1 << 1) > > +#define SWPS2_FSTA_RXUF (1 << 2) > > +#define SWPS2_FSTA_TXRDY (1 << 8) > > +#define SWPS2_FSTA_TXOF (1 << 9) > > +#define SWPS2_FSTA_TXUF (1 << 10) > > + > > +#define SW_PS2_SAMPLE_CLK (1000000) > > +#define SW_PS2_SCLK (125000) > > + > > +struct sunxips2data { > > + int irq; > > + spinlock_t ps2_lock; > > + void __iomem *base_address; /* virt address of control > registers*/ > > + struct serio *serio; /* serio*/ > > + struct device *dev; > > + struct clk *pclk; > > +}; > > + > > +/*********************/ > > +/* Interrupt handler */ > > +/*********************/ > > +static irqreturn_t sunxips2_interrupt(int irq, void *dev_id) > > +{ > > + struct sunxips2data *drvdata = dev_id; > > + u32 intr_status; > > + u32 fifo_status; > > + unsigned char byte; > > + u32 rval; > > + u32 error = 0; > > + > > + spin_lock(&drvdata->ps2_lock); > > + > > + /* Get the PS/2 interrupts and clear them */ > > + intr_status = readl(drvdata->base_address + SW_PS2_LSTAT); > > + fifo_status = readl(drvdata->base_address + SW_PS2_FSTAT); > > + > > + /*Check Line Status Register*/ > > + if (intr_status & 0x10f) { > > + if (intr_status & 0x08) > > + dev_info(drvdata->dev, "PS/2 Stop Bit Error!"); > > + if (intr_status & 0x04) > > + dev_info(drvdata->dev, "PS/2 Acknowledge > Error!\n"); > > + if (intr_status & 0x02) > > + dev_info(drvdata->dev, "PS/2 Parity Error!\n"); > > + if (intr_status & 0x100) > > + dev_info(drvdata->dev, "PS/2 Transmit Data > Timeout!\n"); > > + if (intr_status & 0x01) > > + dev_info(drvdata->dev, "PS/2 Receive Data > Timeout!\n"); > > + > > + writel(readl(drvdata->base_address + SW_PS2_GCTRL)|0x4, > drvdata->base_address + SW_PS2_GCTRL);/*reset PS/2 controller*/ > > + writel(0x10f, drvdata->base_address + SW_PS2_LSTAT); > > + > > + error = 1; > > + } > > + > > + /*Check FIFO Status Register*/ > > + if (fifo_status & 0x0606) { > > + if (fifo_status & 0x400) > > + dev_info(drvdata->dev, "PS/2 Tx FIFO > Underflow!\n"); > > + if (fifo_status & 0x200) > > + dev_info(drvdata->dev, "PS/2 Tx FIFO Overflow!\n"); > > + if (fifo_status & 0x04) > > + dev_info(drvdata->dev, "PS/2 Rx FIFO > Underflow!\n"); > > + if (fifo_status & 0x02) > > + dev_info(drvdata->dev, "PS/2 Rx FIFO Overflow!\n"); > > + > > + writel(readl(drvdata->base_address + SW_PS2_GCTRL)|0x4, > drvdata->base_address + SW_PS2_GCTRL); /*reset PS/2 controller*/ > > + writel(0x707, drvdata->base_address + SW_PS2_FSTAT); > > + error = 1; > > + } > > + > > + rval = (fifo_status >> 16) & 0x3; > > + while (!error && rval--) { > > + byte = readl(drvdata->base_address + SW_PS2_DATA) & 0xff; > > + dev_info(drvdata->dev, "PS/2 Receive %02x\n", byte); > > You really want to log every input byte in the logs? > > > + serio_interrupt(drvdata->serio, byte, 0); > > + } > > + > > + writel(intr_status, drvdata->base_address + SW_PS2_LSTAT); > > + writel(fifo_status, drvdata->base_address + SW_PS2_FSTAT); > > + > > + spin_unlock(&drvdata->ps2_lock); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int sunxips2_open(struct serio *pserio) > > +{ > > + struct sunxips2data *drvdata = pserio->port_data; > > + u32 src_clk = 0; > > + u32 clk_scdf; > > + u32 clk_pcdf; > > + u32 rval; > > + > > + /*Set Line Control And Enable Interrupt*/ > > + rval = > SWPS2_LCTL_TXDTOEN|SWPS2_LCTL_STOPERREN|SWPS2_LCTL_ACKERREN|SWPS2_LCTL_PARERREN|SWPS2_LCTL_RXDTOEN; > > + writel(rval, drvdata->base_address + SW_PS2_LCTRL); > > + > > + /*Reset FIFO*/ > > + writel(0x3<<16 | 0x607, drvdata->base_address + SW_PS2_FCTRL); > > + > > + src_clk = clk_get_rate(drvdata->pclk); > > + > > + if (!src_clk) { > > + dev_info(drvdata->dev, "w_ps2c_set_sclk error, source > clock is 0."); > > + return -1; > > + } > > + > > + /*Set Clock Divider Register*/ > > + clk_scdf = ((src_clk + (SW_PS2_SAMPLE_CLK>>1)) / SW_PS2_SAMPLE_CLK > - 1); > > + clk_pcdf = ((SW_PS2_SAMPLE_CLK + (SW_PS2_SCLK>>1)) / SW_PS2_SCLK - > 1); > > + rval = (clk_scdf<<8) | clk_pcdf;/* | (PS2_DEBUG_SEL<<16);*/ > > + writel(rval, drvdata->base_address + SW_PS2_CLKDR); > > + > > + /*Set Global Control Register*/ > > + rval = SWPS2_RESET|SWPS2_INTEN|SWPS2_MASTER|SWPS2_BUSEN; > > + writel(rval, drvdata->base_address + SW_PS2_GCTRL); > > + > > + udelay(100); > > + > > + return 0; > > +} > > + > > +static void sunxips2_close(struct serio *pserio) > > +{ > > + struct sunxips2data *drvdata = pserio->port_data; > > + > > + spin_lock(&drvdata->ps2_lock); > > + /* Disable the PS2 interrupts */ > > + writel(0, drvdata->base_address + SW_PS2_GCTRL); > > + spin_unlock(&drvdata->ps2_lock); > > +} > > + > > +static int sunxips2_write(struct serio *pserio, unsigned char val) > > +{ > > + struct sunxips2data *drvdata = (struct sunxips2data > *)pserio->port_data; > > + u32 timeout = 10000; > > + > > + do { > > + if (readl(drvdata->base_address + SW_PS2_FSTAT) & > SWPS2_FSTA_TXRDY) { > > + writel(val, drvdata->base_address + SW_PS2_DATA); > > + return 0; > > + } > > + } while (timeout--); > > + > > + return -1; > > +} > > + > > +static int sunxips2_probe(struct platform_device *ofdev) > > +{ > > + struct resource *res; /* IO mem resources */ > > + struct sunxips2data *drvdata; > > + struct serio *serio; > > + struct device *dev = &ofdev->dev; > > + unsigned int irq; > > + int error; > > + > > + drvdata = devm_kzalloc(dev, sizeof(struct sunxips2data), > GFP_KERNEL); > > + serio = devm_kzalloc(dev, sizeof(struct serio), GFP_KERNEL); > > serio is a refcounted structure, it should not be allocated with devm. > > > + if (!drvdata || !serio) > > + error = -ENOMEM; > > and...? > > > + > > + /* Request clock */ > > + drvdata->pclk = clk_get(dev, NULL); > > + if (IS_ERR(drvdata->pclk)) > > + dev_dbg(dev, "couldn't get clock %li\n", > > + PTR_ERR(drvdata->pclk)); > > Why %li? > > > + > > + if (!IS_ERR(drvdata->pclk)) { > > "} else {" > > > > + error = clk_prepare_enable(drvdata->pclk); > > + if (error < 0) { > > + dev_err(dev, "failed to enable clock %d\n", error); > > + return error; > > Leaking clk here. > > > + } > > + } > > + > > + /* IO */ > > + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); > > + drvdata->base_address = devm_ioremap_resource(dev, res); > > + if (IS_ERR(drvdata->base_address)) { > > + dev_err(dev, "failed to map registers\n"); > > + error = PTR_ERR(drvdata->base_address); > > aaaand...? > > > + } > > + > > + serio->id.type = SERIO_8042; > > + serio->write = sunxips2_write; > > + serio->open = sunxips2_open; > > + serio->close = sunxips2_close; > > + serio->port_data = drvdata; > > + serio->dev.parent = dev; > > + strlcpy(serio->name, dev_name(dev), sizeof(serio->name)); > > + strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys)); > > + > > + platform_set_drvdata(ofdev, drvdata); > > + serio_register_port(serio); > > + > > + /* Get IRQ for the device */ > > + irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); > > + if (!irq) { > > + dev_err(dev, "no IRQ found\n"); > > + return -ENODEV; > > Leaking clk and serio here. > > > + } > > + > > + drvdata->irq = irq; > > + drvdata->serio = serio; > > + drvdata->dev = dev; > > + error = devm_request_any_context_irq(drvdata->dev, drvdata->irq, > &sunxips2_interrupt, 0, > > + DRIVER_NAME, drvdata); > > Please try to fit in 80 columns. > > > + if (error) { > > + dev_err(drvdata->dev, > > + "Couldn't allocate interrupt %d : error: %d\n", > drvdata->irq, error); > > + return error; > > + } > > + return 0; /* success */ > > +} > > + > > +static int sunxips2_remove(struct platform_device *of_dev) > > +{ > > + struct sunxips2data *drvdata = platform_get_drvdata(of_dev); > > + > > + if (!IS_ERR(drvdata->pclk)) { > > + clk_disable_unprepare(drvdata->pclk); > > + clk_put(drvdata->pclk); > > If serio write comes here what will happen? > > > + } > > + serio_unregister_port(drvdata->serio); > > If interrupt comes here what will happen? > > > + mdelay(2); > > Why do you need mdelay? > > > + return 0; > > +} > > + > > +/* Match table for of_platform binding */ > > +static const struct of_device_id sunxips2_of_match[] = { > > + { .compatible = "allwinner,sun7i-a20-ps2", }, > > + { }, > > +}; > > + > > +MODULE_DEVICE_TABLE(of, sunxips2_of_match); > > + > > +/*platform driver structure*/ > > +static struct platform_driver sunxips2_of_driver = { > > + .probe = sunxips2_probe, > > + .remove = sunxips2_remove, > > + .driver = { > > + .name = DRIVER_NAME, > > + .owner = THIS_MODULE, > > + .of_match_table = sunxips2_of_match, > > + }, > > +}; > > +module_platform_driver(sunxips2_of_driver); > > + > > +MODULE_AUTHOR("Aaron.maoye<[email protected] <javascript:;>, " > > Space before "<", closing ">" are missing. > > > + "Vishnu Patekar <[email protected] > <javascript:;>>"); > > +MODULE_DESCRIPTION("Sunxi PS/2 driver"); > > +MODULE_LICENSE("GPL"); > > -- > > 1.7.9.5 > > > > Thanks. > > -- > Dmitry > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:;>. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
