Hello,

On Tuesday, December 9, 2014 3:50:05 AM UTC+5:30, Maxime Ripard wrote:
>
> Hi, 
>
> On Sun, Dec 07, 2014 at 04:45:17AM +0530, vishnupatekar wrote: 
> > A10 and A20 have same PS2 addresses, clocks, interrupts. 
> > added compatible as allwinner,sun4i-a10-ps2. 
> > 
> > Signed-off-by: vishnupatekar <[email protected] <javascript:>> 
>
> You should have your real name here. 
>
This is my real Name. Vishnu Patekar  :)

>
> > --- 
> >  .../bindings/input/allwinner,sunxi-ps2.txt         |   23 
> ++++++++++++++++++++ 
> >  1 file changed, 23 insertions(+) 
> >  create mode 100644 
> Documentation/devicetree/bindings/input/allwinner,sunxi-ps2.txt 
> > 
> > diff --git 
> a/Documentation/devicetree/bindings/input/allwinner,sunxi-ps2.txt 
> b/Documentation/devicetree/bindings/input/allwinner,sunxi-ps2.txt 
> > new file mode 100644 
> > index 0000000..3a8919a 
> > --- /dev/null 
> > +++ b/Documentation/devicetree/bindings/input/allwinner,sunxi-ps2.txt 
> > @@ -0,0 +1,23 @@ 
> > +* Device tree bindings for Allwinner A10, A20 PS2 host controller 
>
> > +A20 PS2 is dual role controller(PS2 host and PS2 device). These 
> > +bindings are for PS2 host controller. IBM compliant IBM PS2 and 
> > AT-compatible keyboard and mouse can be connected. 
>
> This should be wrapped to 80 chars. 
>
> Okie.
 

> > +Required properties: 
> > + 
> > + - reg             : Offset and length of the register set for the 
> device. 
> > + - compatible      : Should one of the following: 
> > +                     - "allwinner,sun7i-a20-ps2" 
> > +                     - "allwinner,sun4i-a10-ps2" 
> > + - interrupts      : The interrupt line connected to the PS2. 
> > + - clocks          : The gate clk connected to the PS2. 
> > + 
> > + 
> > +Example: 
> > +        ps20: ps2@0x01c2a000 { 
> > +                compatible = "allwinner,sun7i-a20-ps2"; 
> > +                reg = <0x01c2a000 0x400>; 
> > +                interrupts = <0 62 4>; 
> > +                clocks = <&apb1_gates 6>; 
> > +                status = "disabled"; 
> > +        }; 
> > -- 
> > 1.7.9.5 
> > 
>
> -- 
> Maxime Ripard, Free Electrons 
> Embedded Linux, Kernel and Android engineering 
> http://free-electrons.com 
>

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to