Hi,
On 04-01-15 22:38, Michal Suchanek wrote:
Hello,
I wanted to try mainline u-boot on an inet 86vs tablet.
This tablet has sunxi u-boot config.
I started by
1) copying the A13 Olinuxino Micro defconfig
2) removing redundant (EHCI) and harmful (CONS_INDEX) options
3) changing target name
4) copying dram.c file from u-boot sunxi and registering it with the new target
Remaining problems:
- config includesd a DT file - where to get?
This is only necessary when using an upstream kernel, if you boot with a
boot.scr which loads a linux-sunxi-3.4 kernel you don't need this, just
set to the name which you want to eventually use for the dts for the
upstream kernel (you are going to create a dts for us, right ? :)
- defining display timings
Is there some place these are described?
http://linux-sunxi.org/LCD
Regards,
Hans
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
