It crashes in the DMA driver,... Can you upload a kernel with the ft5x_ts fix for the Kurio 7S with kernel headers?
Le jeudi 15 janvier 2015 13:26:15 UTC, Toroshin Dmitry a écrit : > > > > On Thursday, January 15, 2015 at 6:38:20 PM UTC+6, Mohamed MEDIOUNI wrote: >> >> just crashes after insmod ( 3.4.79) >> >> Le mardi 13 janvier 2015 16:09:07 UTC, Toroshin Dmitry a écrit : >>> >>> >>> >>> On Tuesday, January 13, 2015 at 9:56:03 PM UTC+6, Mohamed MEDIOUNI wrote: >>>> >>>> Loading sunxi_nand in the Kurio7S just makes 100% CPU usage for nandd >>>> without working access >>> >>> sunxi-3.4 nand format is incompatible with lichee-3.4 (sdk kernel). >>> You can try this port of new nand driver: >>> https://github.com/mittorn/sun7i-nand-sunxi >>> <https://www.google.com/url?q=https%3A%2F%2Fgithub.com%2Fmittorn%2Fsun7i-nand-sunxi&sa=D&sntz=1&usg=AFQjCNEpAwshe_H84gn6NrYlGPvnbhMrsw> >>> First you should make source in lib dir, after that run make in root >>> path with LICHEE_KDIR set to sunxi kernel sources path, you shuld get >>> out-of-tree nand.ko module. You need to enable sunxi partition table >>> support in kernel to detect partitions. >>> >> I have tested it only on 3.4.101 and 3.4.104 kernels. And you need to > enable sunxi partition table support (i have disabled creating nodes for > partitions as sunxi kernel already have this feature, it creatres nand1, > nand2 etc). > Did you have any warnings at the build time? Try to insmod it with fb > console with high loglevel. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
