The preferred method of referencing nodes from the dtsi is to use labels, instead of copying the complete tree.
This patch converts sun9i-a80-optimus.dts to use label references. Signed-off-by: Chen-Yu Tsai <[email protected]> --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 76 ++++++++++++++++----------------- 1 file changed, 37 insertions(+), 39 deletions(-) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 58f5cb346519..d4f3866a8d0b 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -61,45 +61,6 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - pio: pinctrl@06000800 { - i2c3_pins_a: i2c3@0 { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_optimus: led-pins@0 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - uart4_pins_a: uart4@0 { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - }; - - uart0: serial@07000000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - uart4: serial@07001000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; - }; - - i2c3: i2c@07003400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -120,3 +81,40 @@ }; }; }; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; +}; + +&i2c3_pins_a { + /* Enable internal pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&pio { + led_pins_optimus: led-pins@0 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&uart4_pins_a { + /* Enable internal pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; -- 2.1.4 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
