Hi,
On Fri, 6 Mar 2015 11:48:50 +0800 (CST)
li <[email protected]> wrote:
> Hi all,
>
> I want to use debian or linaro on A31s, but i don't know how to
> get one,
First of all, you can check if your device already has a page at
the linux-sunxi wiki:
http://linux-sunxi.org/Category:Devices
If yes, then you can find further instructions there and more details
about the mainline u-boot and the mainline kernel support for it. The
core A31s SoC features are already supported, but different devices
may have different configurations for the peripherals.
If there is no device page for your device, then you are encouraged
to create one. There is a basic instruction and a checklist for the
things to do:
http://linux-sunxi.org/New_Device_howto
For installing Debian on a few supported Allwinner devices, you
can check
https://wiki.debian.org/InstallingDebianOn/Allwinner
But if the device is not fully supported yet, then the whole process
of installation in some way resembles the
http://en.wikipedia.org/wiki/Ready-to-assemble_furniture
Which means that you may need to be ready to compile the u-boot
bootloader and the kernel yourself and then unpack the rootfs
with the distribution of your choice (the necessary instructions
are available in the linux-sunxi wiki).
> and it seems that the forum only support A10, A20, and A80,
Some A31(s) devices are already supported. But A80 is not quite at
that level yet.
> I am realy appreciated if you can provide any suggestion, thank you.
Hope this helped.
--
Best regards,
Siarhei Siamashka
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
