Hi,
On 20-03-15 21:31, Karsten Merker wrote:
On Fri, Mar 20, 2015 at 09:19:46PM +0100, Karsten Merker wrote:
I have just tried to take a look at the LeMaker Banana Pi schematics
on lemaker.org and am a bit confused...
According to them, the OTG VBUS power supply is controlled by a SY6280
switch, whose enable pin is driven by the USB0-DRV line. This USB0-DRV
line appears to be connected to both PB9 on the SoC as well as to GPIO2
on the AXP209. Any idea why it goes to _both_ the A20 and the AXP209?
Sorry, I misread the schematics - it goes to N_VBUSEN on the AXP209,
not to GPIO2, so it is only controlled from the A20 via PB9.
Thanks for figuring this out, unfortunately vbus-det is connected to
gpio1 of the axp209, and not to PH5 as the fex file says, so we need
axp209 gpio support in the kernel before we can get otg support going
on the bananapi.
Regards,
Hans
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
