On Wed, Mar 18, 2015 at 12:01:58PM +0100, Hans de Goede wrote: > Hi, > > On 18-03-15 11:37, Maxime Ripard wrote: > >On Thu, Mar 12, 2015 at 04:45:50PM +0100, Jens Thiele wrote: > >>This commit introduces two new optional device-tree properties: > >>"tp-sensitive-adjust": adjust sensitivity of pen down detection > >>"filter-type": select median and averaging filter > >> > >>The previous fixed defaults, didn't work well for the Olimex > >>A13-LCD10TS (I have). > >> > >>Signed-off-by: Jens Thiele <ka...@karme.de> > >>--- > >> .../devicetree/bindings/input/touchscreen/sun4i.txt | 19 > >> +++++++++++++++++-- > >> drivers/input/touchscreen/sun4i-ts.c | 17 > >> +++++++++++++---- > >> 2 files changed, 30 insertions(+), 6 deletions(-) > >> > >>diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt > >>b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt > >>index 433332d..c93edfa 100644 > >>--- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt > >>+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt > >>@@ -8,8 +8,20 @@ Required properties: > >> - #thermal-sensor-cells: shall be 0 > >> > >> Optional properties: > >>- - allwinner,ts-attached: boolean indicating that an actual touchscreen is > >>- attached to the controller > >>+ - allwinner,ts-attached : boolean indicating that an actual touchscreen > >>+ is attached to the controller > >>+ - allwinner,tp-sensitive-adjust : integer (4 bits) > >>+ adjust sensitivity of pen down detection > >>+ between 0 (least sensitive) and 15 > >>+ (defaults to 15) > >>+ - allwinner,filter-type : integer (2 bits) > >>+ select median and averaging filter > >>+ samples used for median / averaging filter > >>+ 0: 4/2 > >>+ 1: 5/3 > >>+ 2: 8/4 > >>+ 3: 16/8 > >>+ (defaults to 1) > > > >You shouldn't rely on any bits length in your binding. > > > >And this looks really more of a configuration option, and would be > >better exposed through sysfs. > > Erm, no, this is to adjust for properties of the touchscreen, so this is > hardware configuration, and as such definitely belongs in the dts.
Applied, thank you. -- Dmitry -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
