On sun6i we already have PLL6 as AHB1 clock's parent. However this was previously set in the dma controller node, which takes effect when the dma controller is probed.
We want this to take effect as soon as possible, so hrtimer rate calculation is correct, and to be sure the AHB1 clock rate remains as stable as possible. Signed-off-by: Chen-Yu Tsai <[email protected]> --- arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 2a37ee93265e..6d29eab5fe32 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -196,6 +196,14 @@ reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1"; + + /* + * Clock AHB1 from PLL6, instead of CPU/AXI which + * has rate changes due to cpufreq. Also the DMA + * controller requires AHB1 clocked from PLL6. + */ + assigned-clocks = <&ahb1>; + assigned-clock-parents = <&pll6 0>; }; ahb1_gates: clk@01c20060 { @@ -381,10 +389,6 @@ clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; - - /* DMA controller requires AHB1 clocked from PLL6 */ - assigned-clocks = <&ahb1>; - assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { -- 2.1.4 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
