When did you get this message ?
We finished configuring the new mail server yesterday.
I supose the wiki user credential is ok ( the same we used in the other
mail server ).
Maybe its a dns replication delay.
Can you retest later today ?
Thanks,
Gustavo Zamboni
Le 27/05/2015 07:35, Lawrence Yu a écrit :
Hi,
On Tue, May 26, 2015 at 10:17 PM, Priit Laes <[email protected]
<mailto:[email protected]>> wrote:
On Wednesday, May 27, 2015 at 5:53:06 AM UTC+3, Lawrence Y wrote:
Hi,
Hi!
I was wondering if there was an example of a dts that used
external interrupts with the sun6i or sun8i chips? I've been
trying to configure an external interrupt on PA23 with no luck
so far. I looked through all of the sun6i and sun8i dts files
for an example but did not find anything that appeared to be
using an external interrupt.
I did find this documentation on external interrupts on the wiki
http://linux-sunxi.org/External_interrupts
It is nice that you found our wiki somewhat helpful, but please
see below.
but it appears to be for sun7i which does not use a banked
interrupt architecture.
I also found this patch set which contains functionality for
external interrupts on the sun6i A31, but I think I am
misunderstanding how to setup the interrupt in the dts.
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-May/260377.html
For background, I am trying to get a gsl3675 touchscreen to
generate an IRQ inside the sun6i A31s when the interrupt line
toggles. I can confirm that some signal line toggles when
touches are present with a logic analyzer, but it's unclear if
it is PA3 or PA23 and I have been trying both. The fex file
says PA3 but the A31 schematics say PA23.
Now, please start with the New Device Howto page found here:
http://linux-sunxi.org/New_Device_howto
And work through it, because there currently isn't a single device
documented in the wiki with gsl3675 touchscreen controller.
A snippet of the relevant portions of my dts are below, if it
helps. (my dts could be totally wrong)
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
gsl3675: touchscreen@40 {
compatible = "silead,gsl3675";
reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ts_irq_pin>;
};
};
&pio {
ts_irq_pin: tspin@0 {
allwinner,pins = "PA23";
allwinner,function = "irq";
allwinner,drive = <0>;
allwinner,pull = <1>;
};
};
When I load my test module I get the following error which may
or may not be relevant. (I don't see where the irq 55 is
coming from)
[ 10.826782] genirq: Setting trigger mode 11 for irq 55
failed (sunxi_pinctrl_irq_set_type+0x0/0x144)
If anyone has any suggestions on things I could try to set
things up properly so that the the IRQ will fire, I would
appreciate them.
Thanks!
Lawrence
--
You received this message because you are subscribed to the Google
Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
I may be doing something wrong registering for the wiki or there might
be a problem with the wiki sending out confirmation emails. I get the
following error when trying to register in order to edit the wiki to
add a new device page. I double checked and my email address appears
correct.
linux-sunxi.org <http://linux-sunxi.org> could not send your
confirmation mail. Please check your email address for invalid characters.
Mailer returned: Unknown error in PHP's mail() function.
Lawrence
--
You received this message because you are subscribed to the Google
Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
