Hi I have connected a LCD RGB 24 bits screen on an olimex A10 board. In first, screen i must obtain:
http://www.tiikoni.com/tis/view/?id=193e911 But this is what i obtained: http://www.tiikoni.com/tis/view/?id=32163ed Whan i move my mouse i can see black rays http://www.tiikoni.com/tis/view/?id=d2cb83f My ic is a HX8238A. Doc here: https://www.olimex.com/Products/_resources/LCD/HX8238A.pdf We can see if i disconnec hsync and vsync it must work in de mode (page 57) To connect my screen , i'm using différents adaptator and total lenght to arrive in fc cable is 20cm. i have added longest cable to see but nothing change, the screen stay the same. I'm using same fex and same screen that lemaker's one (banana pi). It must work but.....not https://github.com/LeMaker/fex_configuration I'm using these pin layer from bananapi: http://www.tiikoni.com/tis/view/?id=c1d97b7 When connecting SEL0 SEL1 SEL2 to power with resistor it didn't work it's normal cause RGB mode is not selected; A question, if RGB signals are inverted, colors will be changed but appearance of the screen will be ok? I think in the kernel de mode is activated and no sync +de mode: is it possible? Thanx -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
