Hi Stefan, you didn't include me in your answer, hence the late reply...
Stefan Monnier schrieb am 29.07.2015 02:02: >> IMHO for a common maximum opp that's a good approach. But for the lowest >> frequency setting, it would seem more logical to me, to raise the voltage >> to a point where all boards will run fine with them, unless those boards >> cannot handle the frequency regardless of the higher voltage. > I generally agre, tho IIRC some measurements seem to indicate that the > lowest frequency settings did not bring much (if any) reduction in power > consumption, making them rather useless. That's an interesting point. However, that would be a different discussion. I wouldn't mind if the 144MHz would be removed - my point was just that if it's supposed to be a common setting, it should work on all boards. I posted a patch today to fix this. [1] That might be a good place to discuss whether this setting should be removed entirely. Regards, Timo [1] https://groups.google.com/forum/#!topic/linux-sunxi/fIfbdn7mrQA -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
