Hi Timo, On Mon, Aug 3, 2015 at 5:23 AM, Timo Sigurdsson <[email protected]> wrote: > sun7i-a20.dtsi contains an cpufreq operating point at 0.9 volts. Most A20 > boards > (or all?), however, do not allow the voltage to go below 1.0V. Thus, raise the > voltage for the lowest operating point to 1.0V so all boards can actually use > it.
Surely it wouldn't be added here if some could supply 0.9v. Is the code that uses this smart enough to sensibly switch between two operating points with the same frequency and different voltages? If so, maybe just add a 144MHz @ 1.0v operating point? (Alternatively, would it make sense to modify the code that uses this to use frequencies with voltages specified that are lower than can be supplied with the lowest voltage it can?) Thanks, -- Julian Calaby Email: [email protected] Profile: http://www.google.com/profiles/julian.calaby/ -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
