Hello, Since the sun4i dmaengine and DT label conversion patches are in this should be now workable.
- fix some minor issues with the spi driver - add spi dt nodes on some boards - include the DMA patch which depends on the dmaengine Thanks Michal Emilio López (1): spi: sun4i: add DMA support Michal Suchanek (8): spi: sunxi: fix transfer timeout spi: sun4i: fix FIFO limit spi: sunxi: check that transfer speed is non-zero ARM: dts: sun7i: cubieboard2: Enable SPI0 ARM: dts: sunxi: add spi aliases on cubieboards ARM: dts: sun5i: add SPI pins on A13 and A10s ARM: dts: sunxi: A10s Olinuxino Micro: add spi2. ARM: dts: sunxi: Add SPI aliases on A10s Olinuxino. arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 1 + arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 10 ++ arch/arm/boot/dts/sun5i-a10s.dtsi | 21 +++ arch/arm/boot/dts/sun5i.dtsi | 49 +++++++ arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 ++ drivers/spi/spi-sun4i.c | 166 ++++++++++++++++++++--- drivers/spi/spi-sun6i.c | 25 +++- 7 files changed, 257 insertions(+), 23 deletions(-) -- 2.1.4 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
