On Fri, Aug 28, 2015 at 05:54:36PM +0800, Chen-Yu Tsai wrote:
> Now that we have axp221.dtsi describing common axp22x hardware, use
> it and reference the nodes instead of declaring the whole tree.
> 
> Also add regulator reference for cpu0 supply.
> 
> Signed-off-by: Chen-Yu Tsai <[email protected]>
> ---
>  arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 114 
> ++++++++++++++--------------
>  1 file changed, 56 insertions(+), 58 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts 
> b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> index d0cfadac0691..d019cb70acec 100644
> --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> @@ -67,6 +67,10 @@
>       };
>  };
>  
> +&cpu0 {
> +     cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &ehci0 {
>       status = "okay";
>  };
> @@ -119,7 +123,7 @@
>  &mmc0 {
>       pinctrl-names = "default";
>       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
> -     vmmc-supply = <&vcc_3v0>;
> +     vmmc-supply = <&reg_dcdc1>;
>       bus-width = <4>;
>       cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
>       cd-inverted;
> @@ -134,7 +138,7 @@
>  &mmc1 {
>       pinctrl-names = "default";
>       pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
> -     vmmc-supply = <&vcc_wifi>;
> +     vmmc-supply = <&reg_aldo1>;
>       mmc-pwrseq = <&wifi_pwrseq>;
>       bus-width = <4>;
>       non-removable;
> @@ -169,65 +173,59 @@
>               reg = <0x68>;
>               interrupt-parent = <&nmi_intc>;
>               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> -             interrupt-controller;
> -             #interrupt-cells = <1>;
> -             dcdc1-supply = <&vcc_3v0>;
> -             dcdc5-supply = <&vcc_dram>;
> -
> -             regulators {
> -                     x-powers,dcdc-freq = <3000>;
> -
> -                     vcc_3v0: dcdc1 {
> -                             regulator-always-on;
> -                             regulator-min-microvolt = <3000000>;
> -                             regulator-max-microvolt = <3000000>;
> -                             regulator-name = "vcc-3v0";
> -                     };
> -
> -                     vdd_cpu: dcdc2 {
> -                             regulator-always-on;
> -                             regulator-min-microvolt = <700000>;
> -                             regulator-max-microvolt = <1320000>;
> -                             regulator-name = "vdd-cpu";
> -                     };
> -
> -                     vdd_gpu: dcdc3 {
> -                             regulator-always-on;
> -                             regulator-min-microvolt = <700000>;
> -                             regulator-max-microvolt = <1320000>;
> -                             regulator-name = "vdd-gpu";
> -                     };
> -
> -                     vdd_sys_dll: dcdc4 {
> -                             regulator-always-on;
> -                             regulator-min-microvolt = <1100000>;
> -                             regulator-max-microvolt = <1100000>;
> -                             regulator-name = "vdd-sys-dll";
> -                     };
> -
> -                     vcc_dram: dcdc5 {
> -                             regulator-always-on;
> -                             regulator-min-microvolt = <1500000>;
> -                             regulator-max-microvolt = <1500000>;
> -                             regulator-name = "vcc-dram";
> -                     };
> -
> -                     vcc_wifi: aldo1 {
> -                             regulator-min-microvolt = <3300000>;
> -                             regulator-max-microvolt = <3300000>;
> -                             regulator-name = "vcc_wifi";
> -                     };
> -
> -                     avcc: aldo3 {
> -                             regulator-always-on;
> -                             regulator-min-microvolt = <3000000>;
> -                             regulator-max-microvolt = <3000000>;
> -                             regulator-name = "avcc";
> -                     };
> -             };
>       };
>  };
>  
> +#include "axp221.dtsi"
> +
> +&reg_aldo1 {
> +     regulator-min-microvolt = <3300000>;
> +     regulator-max-microvolt = <3300000>;
> +     regulator-name = "vcc-wifi";
> +};
> +
> +&reg_aldo3 {
> +     regulator-always-on;
> +     regulator-min-microvolt = <3000000>;
> +     regulator-max-microvolt = <3000000>;
> +     regulator-name = "avcc";
> +};
> +
> +&reg_dcdc1 {
> +     regulator-always-on;
> +     regulator-min-microvolt = <3000000>;
> +     regulator-max-microvolt = <3000000>;
> +     regulator-name = "vcc-3v0";
> +};
> +
> +&reg_dcdc2 {
> +     regulator-always-on;
> +     regulator-min-microvolt = <700000>;
> +     regulator-max-microvolt = <1320000>;
> +     regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc3 {
> +     regulator-always-on;
> +     regulator-min-microvolt = <700000>;
> +     regulator-max-microvolt = <1320000>;
> +     regulator-name = "vdd-gpu";
> +};

I'm know it's just a mechanical change from your part, but is the GPU
regulator really need to be always on?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Attachment: signature.asc
Description: Digital signature

Reply via email to