If I'm not wrong Arch Linux ARM is already using device tree in their releases, you can check it: http://archlinuxarm.org/platforms/armv7/allwinner/a20-olinuxino-lime2
On Monday, September 7, 2015 at 10:52:29 PM UTC+2, [email protected] wrote: > > Hello, > > I recently switched on mainline kernel and I'm trying to switch from FEX > file to device tree system. > > On FEX I was using, LED configuration, Battery management and power button > delay to switch on/off the board (Olimex A20 Lime2). > > I did not find any ready to use example, I'm digging the web to understand > how device tree works and how I can adapt the configuration to my > equipment, not an easy task ! > > It seems the device tree for Allwiner SoC is still in development as I did > not find a lot of information on the web. > > Where could I find some good example to reach my goal ? doest it worth to > spend a lot of time trying to use device tree or should I wait a bit longer > and stick to FEX file ? > > Is there any way to use FEX File allong the mainline kernel ? > > Thank a lot for helping > Florian -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
