The USER_DATA register cannot be accessed using byte accessors on A13 SoCs, thus triggering a bug when using memcpy_toio on this register. Declare an helper macros to convert an OOB buffer into a suitable USER_DATA value and vice-versa.
This patch also fixes an error in the oob_required logic (some OOB data are not written even if the user required it) by removing the oob_required condition, which is perfectly valid since the core already fill ->oob_poi with FFs when oob_required is false. Signed-off-by: Boris Brezillon <[email protected]> Cc: <[email protected]> # 3.19+ Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support") --- Changes since v3: - drop the NFC_USER_DATA_TO_BUF() macro Changes since v2: - add the NFC_USER_DATA_TO_BUF() macro and rename NFC_USER_DATA() into NFC_BUF_TO_USER_DATA() - rework the commit message Changes since v1: - drop the !oob_required conditional path - replace endianness conversions by a macro relying on byte shifting operations --- drivers/mtd/nand/sunxi_nand.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index f97a58d..279cafd 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -147,6 +147,10 @@ #define NFC_ECC_MODE GENMASK(15, 12) #define NFC_RANDOM_SEED GENMASK(30, 16) +/* NFC_USER_DATA helper macros */ +#define NFC_BUF_TO_USER_DATA(buf) ((buf)[0] | ((buf)[1] << 8) | \ + ((buf)[2] << 16) | ((buf)[3] << 24)) + #define NFC_DEFAULT_TIMEOUT_MS 1000 #define NFC_SRAM_SIZE 1024 @@ -646,15 +650,9 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize; /* Fill OOB data in */ - if (oob_required) { - tmp = 0xffffffff; - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp, - 4); - } else { - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, - chip->oob_poi + offset - mtd->writesize, - 4); - } + writel(NFC_BUF_TO_USER_DATA(chip->oob_poi + + layout->oobfree[i].offset), + nfc->regs + NFC_REG_USER_DATA_BASE); chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); @@ -784,14 +782,8 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, offset += ecc->size; /* Fill OOB data in */ - if (oob_required) { - tmp = 0xffffffff; - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp, - 4); - } else { - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob, - 4); - } + writel(NFC_BUF_TO_USER_DATA(oob), + nfc->regs + NFC_REG_USER_DATA_BASE); tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR | (1 << 30); -- 1.9.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
