On Thu, 2015-11-19 at 05:20 +0200, Siarhei Siamashka wrote: > Hello, > > On Wed, 18 Nov 2015 21:51:48 +0100 > Josef Gajdusek <[email protected]> wrote: > > > This patch adds support for the Sunxi thermal sensor on the > > Allwinner H3. > > Also adds declaration of the H3 THS clock to clk-sunxi.c ignoring > > the > > dividers as they are not continuous (clk-divider.c cannot be used > > as it > > does not support setting an enable bit). > > Should be easily extendable for the A33/A83T/... as they have > > similar but > > not completely identical sensors. > > > > Signed-off-by: Josef Gajdusek <[email protected]> > > [...] > > The H3 manual has some nice description of these registers and > explains > how these parameters should be calculated (they depend on the THS > clock > frequency). No magic involved. > > Currently the H3 manual is available from Orange Pi people and > OLIMEX. > There is also an open request about releasing it "officially": > https://github.com/allwinner-zh/documents/issues/9
Yeah, you can find links to the "unofficial" datasheets from wiki: http://linux-sunxi.org/H3#Documentation Päikest, Priit Laes ;) -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
