Hi,

On Wednesday, December 16, 2015 at 2:47:40 AM UTC+1, David Tulloh wrote:
>
> Hi,
>
> I am working on a SinoVoip Bananapi M1
>
> With the current mainline USB does not work. I believe that power to the 
> USB vbus is being disabled during boot.
>
> Failing build v4.4-rc5
> Working build v4.2.3
>
> Compiled with
> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- sunxi_defconfig 
> menuconfig zImage dtbs
>
> The boot log is attached, debug and CONFIG_REGULATOR_DEBUG were enabled.
> The config file is also attached.
>
> I am happy to do further work on the problem but my unfamiliarity with the 
> kernel means I'm flailing in the dark.
>
>
> David
>

The sunxi usb-phy driver now requires extcon (due to the added otg 
support), maybe the defconfig is not enabling extcon and thereby you are 
not getting the sunxi usb-phy driver build, or not build-in at least ?

Can you edit .config after the make defconfig and see what the value for 
CONFIG_PHY_SUN4I_USB is ?

Regards,

Hans

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to