Re: [linux-sunxi][PATCH] ARM: dts: sun7i: Enable USB DRC on Itead Ibox

[Hans de Goede]

Hi,

On 08-02-16 16:59, codekip...@gmail.com wrote:

From: Marcus Cooper <codekip...@gmail.com>

Enable the otg/drc usb controller on the Itead Ibox device.

Signed-off-by: Marcus Cooper <codekip...@gmail.com>

Same remark as with your Olimex A20 EVB board patch, please
also provide a vbus detect pin setting. If for some reason the
VBus detect is not wired up, or not working properly, please mention
this explicitly in the commit message.

Note that in some cases the axp209 is used for vbus detect,
rather then a gpio, see e.g. :

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts/sun7i-a20-bananapi.dts?id=dcfd8443d89f593e0c667a988ab017e716b33061

Regards,

Hans

---
  arch/arm/boot/dts/sun7i-a20-itead-ibox.dts     | 14 ++++++++++++++
  arch/arm/boot/dts/sunxi-itead-core-common.dtsi |  9 +++++++++
  2 files changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts 
b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
index 661c21d..a512581 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
@@ -118,8 +118,22 @@
                allwinner,drive = <SUN4I_PINCTRL_20_MA>;
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PH4";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
  };

  &reg_ahci_5v {
        status = "okay";
  };
+
+&usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>;
+       usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi 
b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
index 2565d51..d22eea3 100644
--- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
+++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
@@ -88,6 +88,10 @@
        status = "okay";
  };

+&otg_sram {
+       status = "okay";
+};
+
  #include "axp209.dtsi"

  &reg_dcdc2 {
@@ -129,6 +133,11 @@
        status = "okay";
  };

+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
  &usbphy {
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;

--
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.