Hi,

On 12-02-16 12:59, [email protected] wrote:
From: Marcus Cooper <[email protected]>

Enable the otg/drc usb controller on the MK802.

Signed-off-by: Marcus Cooper <[email protected]>
---
Changes since v1:
- Corrected name of the device in subject & description.

Looks good to me:

Reviewed-by: Hans de Goede <[email protected]>

Regards,

Hans


---
  arch/arm/boot/dts/sun4i-a10-mk802.dts | 33 +++++++++++++++++++++++++++++++++
  1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts 
b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index ddf0683..ee46ea8 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -44,6 +44,7 @@
  #include "sun4i-a10.dtsi"
  #include "sunxi-common-regulators.dtsi"
  #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>

  / {
        model = "MK802";
@@ -84,7 +85,25 @@
        status = "okay";
  };

+&otg_sram {
+       status = "okay";
+};
+
  &pio {
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PH4";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+               allwinner,pins = "PH5";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
        usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
                allwinner,pins = "PH12";
                allwinner,function = "gpio_out";
@@ -93,6 +112,10 @@
        };
  };

+&reg_usb0_vbus {
+       status = "okay";
+};
+
  &reg_usb1_vbus {
        status = "okay";
  };
@@ -109,7 +132,17 @@
        status = "okay";
  };

+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
  &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";


--
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to