From: Krzysztof Adamski <[email protected]> OrangePi Plus board has two leds - green ("pwr") and red ("status") and two switches ("sw4" and "sw2"). This patch describes them in devicetree.
Signed-off-by: Krzysztof Adamski <[email protected]> Signed-off-by: Hans de Goede <[email protected]> --- Changes in v6 (hdegoede): -Merge leds and r_leds nodes into one -Fix led labels to be in <board>:<colour>:<role> form -Alphabetically sort the added nodes -Add support for sw2 (this is the small reset-like button) --- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 63 ++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index a680b1f..a7cdfd0 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/sun4i-a10.h> / { @@ -59,6 +60,43 @@ stdout-path = "serial0:115200n8"; }; + gpio_keys { + compatible = "gpio-keys"; + input-name = "sw4"; + + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw2@0 { + label = "sw2"; + linux,code = <BTN_1>; + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; + }; + + sw4@0 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + status_led { + label = "orangepi-plus:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + + pwr_led { + label = "orangepi-plus:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -72,6 +110,31 @@ }; }; +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL03", "PL04"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + &ehci1 { status = "okay"; }; -- 2.7.3 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
