Hi,
On 06-06-16 17:21, Boris Brezillon wrote:
Hello,
This patch series is adding the normal sunxi NAND controller driver to
u-boot.
It's based on the Linux driver, with a few adaptions to make it work
in Linux.
It's based on Scott's series syncing the MTD/NAND frameworks with
Linux 4.6 [1].
The entire series looks good to me, execept for one small remark
to 3/6 see me reply to that patch, with that fixed this series
is:
Acked-by: Hans de Goede <hdego...@redhat.com>
Scott, I believe it is best for this series to be merged through
your tree, can you pick it up once any remarks you may have
are dealt with ?
Regards,
Hans
Best Regards,
Boris
[1]https://patchwork.ozlabs.org/patch/627928/
Boris Brezillon (4):
sunxi: Add missing macros to configure the NAND controller clk
mtd: nand: Add the sunxi NAND controller driver
mtd: nand: Add a full-id entry for the H27QCG8T2E5R‐BCF NAND
sunxi: Enable NAND controller on the CHIP
Brian Norris (1):
mtd: nand: add common DT init code
Maxime Ripard (1):
sun5i: Add NAND controller to the sun5i DTSI
arch/arm/dts/sun5i-a10s.dtsi | 14 +
arch/arm/dts/sun5i-a13-olinuxino.dts | 15 +
arch/arm/dts/sun5i-r8-chip.dts | 15 +
arch/arm/dts/sun5i.dtsi | 49 +
arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 5 +
board/sunxi/board.c | 9 +-
drivers/mtd/nand/Kconfig | 8 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/nand_base.c | 70 +
drivers/mtd/nand/nand_ids.c | 4 +
drivers/mtd/nand/sunxi_nand.c | 1845 +++++++++++++++++++++++++
include/configs/sunxi-common.h | 2 +
include/fdtdec.h | 1 +
include/linux/mtd/nand.h | 3 +
lib/fdtdec.c | 1 +
15 files changed, 2038 insertions(+), 4 deletions(-)
create mode 100644 drivers/mtd/nand/sunxi_nand.c
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
