The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure.
Signed-off-by: Michal Suchanek <[email protected]> --- v2: - fix build error - use unsigned instead of int in max_t - use tfr->speed_hz instead of sspi->max_speed_hz - commit 47284e3e0f3c427c93f8583549b6c938e8a18015 changes the driver to use tfr->speed_hz v3: - avoid max_t by using unsigned constant --- drivers/spi/spi-sun4i.c | 10 +++++++++- drivers/spi/spi-sun6i.c | 10 +++++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index 4213508..0c2216a 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -173,6 +173,7 @@ static int sun4i_spi_transfer_one(struct spi_master *master, { struct sun4i_spi *sspi = spi_master_get_devdata(master); unsigned int mclk_rate, div, timeout; + unsigned int start, end, tx_time; unsigned int tx_len = 0; int ret = 0; u32 reg; @@ -279,9 +280,16 @@ static int sun4i_spi_transfer_one(struct spi_master *master, reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH); + tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U); + start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, - msecs_to_jiffies(1000)); + msecs_to_jiffies(tx_time)); + end = jiffies; if (!timeout) { + dev_warn(&master->dev, + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms", + dev_name(&spi->dev), tfr->len, tfr->speed_hz, + jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; goto out; } diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index fe70695..8f6be86 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -160,6 +160,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, { struct sun6i_spi *sspi = spi_master_get_devdata(master); unsigned int mclk_rate, div, timeout; + unsigned int start, end, tx_time; unsigned int tx_len = 0; int ret = 0; u32 reg; @@ -269,9 +270,16 @@ static int sun6i_spi_transfer_one(struct spi_master *master, reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH); + tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U); + start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, - msecs_to_jiffies(1000)); + msecs_to_jiffies(tx_time)); + end = jiffies; if (!timeout) { + dev_warn(&master->dev, + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms", + dev_name(&spi->dev), tfr->len, tfr->speed_hz, + jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; goto out; } -- 2.8.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
