On Thu, Jun 23, 2016 at 04:07:13AM -0700, [email protected] wrote: > > > +&usb_otg { > > > + dr_mode = "host"; > > > + status = "okay"; > > > +}; > > > + > > > +&usbphy { > > > + usb0_vbus-supply = <®_vcc5v0>; > > > + status = "okay"; > > > + > > > +}; > > > > It doesn't work as USB OTG ? > > > > The hardware should work as OTG. In FEL mode it works as device, and > in current dt configuration - as host. I've spend some time trying > to make it work as otg, but didn't succeed. > > There are some hardware differences between our board and other a33, > but if you say that OTG work, I'll spend some additional time > working on it.
Yes, I've been testing and got it to work on at least two other A33 boards (the R16 Parrot and the Sinlinx SinA33). You can look at the Parrot DT, you should have everything you need (but you will most likely need linux-next). Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature
