Hi, On Sat, Jun 25, 2016 at 05:45:03AM +0200, [email protected] wrote: > From: Ondrej Jirman <[email protected]> > > PLL1 on H3 requires special factors application algorithm, > when the rate is changed. This algorithm was extracted > from the arisc code that handles frequency scaling > in the BSP kernel. > > This commit adds optional apply function to > struct factors_data, that can implement non-trivial > factors application method, when necessary. > > Also struct clk_factors_config is extended with position > of the PLL lock flag.
Have you tested the current implementation, and found that it was not
working, or did you duplicate the arisc code directly?
> /**
> + * sun8i_h3_apply_pll1_factors() - applies n, k, m, p factors to the
> + * register using an algorithm that tries to reserve the PLL lock
> + */
> +
> +static void sun8i_h3_apply_pll1_factors(struct clk_factors *factors, struct
> factors_request *req)
> +{
> + const struct clk_factors_config *config = factors->config;
> + u32 reg;
> +
> + /* Fetch the register value */
> + reg = readl(factors->reg);
> +
> + if (FACTOR_GET(config->pshift, config->pwidth, reg) < req->p) {
> + reg = FACTOR_SET(config->pshift, config->pwidth, reg, req->p);
> +
> + writel(reg, factors->reg);
> + __delay(2000);
> + }
So there was some doubts about the fact that P was being used, or at
least that it was useful.
> + if (FACTOR_GET(config->mshift, config->mwidth, reg) < req->m) {
> + reg = FACTOR_SET(config->mshift, config->mwidth, reg, req->m);
> +
> + writel(reg, factors->reg);
> + __delay(2000);
> + }
> +
> + reg = FACTOR_SET(config->nshift, config->nwidth, reg, req->n);
> + reg = FACTOR_SET(config->kshift, config->kwidth, reg, req->k);
> +
> + writel(reg, factors->reg);
> + __delay(20);
> +
> + while (!(readl(factors->reg) & (1 << config->lock)));
So, they are applying the dividers first, and then applying the
multipliers, and then wait for the PLL to stabilize.
> +
> + if (FACTOR_GET(config->mshift, config->mwidth, reg) > req->m) {
> + reg = FACTOR_SET(config->mshift, config->mwidth, reg, req->m);
> +
> + writel(reg, factors->reg);
> + __delay(2000);
> + }
> +
> + if (FACTOR_GET(config->pshift, config->pwidth, reg) > req->p) {
> + reg = FACTOR_SET(config->pshift, config->pwidth, reg, req->p);
> +
> + writel(reg, factors->reg);
> + __delay(2000);
> + }
However, this is kind of weird, why would you need to re-apply the
dividers? Nothing really changes. Have you tried without that part?
Since this is really specific, I guess you could simply make the
clk_ops for the nkmp clocks public, and just re-implement set_rate
using that logic.
You might also need to set an upper limit on P, since the last value
(4) is not a valid one.
I guess you could do that by adding a max field in the __ccu_div
structure.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature
