On Thu, Sep 8, 2016 at 6:06 PM, Ciprian Manea <[email protected]> wrote: > BLOKS.de cares about Allwinner's U-boot! ;) > > So I tried the latest U-boot, configuring it using Sinlinx_SinA33_defconfig.
The defconfig does not have the eMMC connected mmc configured. Please try this branch: https://github.com/wens/u-boot-sunxi/tree/sina33-otg I'll be sending the patches out in a few days. ChenYu > Then I used this how-to web page https://linux-sunxi.org/Bootable_SD_card to > prepare SinA33 nand and write the u-boot-spl & u-boot. > Doing: > # dd if=/dev/zero of=/dev/mmcblk1 bs=1M count=1 > # dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk1 bs=1024 seek=8 > > Got the following error at boot time: > U-Boot SPL 2016.09-rc2-00125-g6e8b42f (Sep 08 2016 - 11:00:46) DRAM: 1024 > MiB Trying to boot from MMC2 MMC Device 1 not found spl: could not find mmc > device. error: -19 SPL: failed to boot from all boot devices ### ERROR ### > Please RESET the board ### > > The I tried with sunxi-spl.bin and u-boot.bin > # dd if=spl/sunxi-spl.bin of=/dev/mmcblk1 bs=1024 seek=8 > # dd if=u-boot.bin of=/dev/mmcblk1 bs=1024 seek=32 > > But I got the same errors! > > > Am I missing any steps in between? > > Thanks > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
