Sinlinx SinA31s comes with an optional 7" 1024x600 LCD panel with
capacitive touch panel that bolts on to the board.
Enable the display using a panel with close timings. This patch is more
of a proof of concept. The LCD panel has no markings whatsoever, and
the timings are not exactly the same, and as a result the display produces
glitch lines sometimes.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index 6ead2f5c847a..2d5cf8c9a12f 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -63,6 +63,23 @@
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
};
};
+
+ panel: panel {
+ compatible = "avic,tm070ddh03", "simple-panel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel_input: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_lcd>;
+ };
+ };
+ };
};
&ehci0 {
@@ -148,6 +165,19 @@
regulator-name = "vcc-gmac-phy";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd0_rgb888_pins>;
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_lcd: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+};
+
&usbphy {
status = "okay";
};
--
2.9.3
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
