From: Andre Przywara <andre.przyw...@arm.com>

The Allwinner A64 SoC is a low-cost chip with 4 ARM Cortex-A53 cores
and the typical tablet / TV box peripherals.
The SoC is based on the (32-bit) Allwinner H3 chip, sharing most of
the peripherals and the memory map.
Although the cores are proper 64-bit ones, the whole SoC is actually
limited to 4GB (including all the supported DRAM), so we use 32-bit
address and size cells. This has the nice feature of us being able to
reuse the DT for 32-bit kernels as well.
This .dtsi lists the hardware that we support so far.

Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
Acked-by: Rob Herring <r...@kernel.org>
Acked-by: Chen-Yu Tsai <w...@csie.org>
[Maxime: Convert to CCU binding, drop the MMC support for now]
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
 Documentation/devicetree/bindings/arm/sunxi.txt |   1 +-
 MAINTAINERS                                     |   1 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi   | 263 +++++++++++++++++-
 3 files changed, 265 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt 
b/Documentation/devicetree/bindings/arm/sunxi.txt
index 3975d0a0e4c2..4d6467cc2aa2 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -14,4 +14,5 @@ using one of the following compatible strings:
   allwinner,sun8i-a83t
   allwinner,sun8i-h3
   allwinner,sun9i-a80
+  allwinner,sun50i-a64
   nextthing,gr8
diff --git a/MAINTAINERS b/MAINTAINERS
index 1cd38a7e0064..86488e92655f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1019,6 +1019,7 @@ L:        linux-arm-ker...@lists.infradead.org (moderated 
for non-subscribers)
 S:     Maintained
 N:     sun[x456789]i
 F:     arch/arm/boot/dts/ntc-gr8*
+F:     arch/arm64/boot/dts/allwinner/
 
 ARM/Allwinner SoC Clock Support
 M:     Emilio López <emi...@elopez.com.ar>
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi 
b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
new file mode 100644
index 000000000000..3d70be3a0049
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ * based on the Allwinner H3 dtsi:
+ *    Copyright (C) 2015 Jens Kuske <jensku...@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+/ {
+       interrupt-parent = <&gic>;
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       device_type = "cpu";
+                       reg = <0>;
+                       enable-method = "psci";
+               };
+
+               cpu1: cpu@1 {
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       device_type = "cpu";
+                       reg = <1>;
+                       enable-method = "psci";
+               };
+
+               cpu2: cpu@2 {
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       device_type = "cpu";
+                       reg = <2>;
+                       enable-method = "psci";
+               };
+
+               cpu3: cpu@3 {
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       device_type = "cpu";
+                       reg = <3>;
+                       enable-method = "psci";
+               };
+       };
+
+       osc24M: osc24M_clk {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "osc24M";
+       };
+
+       osc32k: osc32k_clk {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <32768>;
+               clock-output-names = "osc32k";
+       };
+
+       psci {
+               compatible = "arm,psci-0.2";
+               method = "smc";
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 13
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 14
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 11
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 10
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               ccu: clock@01c20000 {
+                       compatible = "allwinner,sun50i-a64-ccu";
+                       reg = <0x01c20000 0x400>;
+                       clocks = <&osc24M>, <&osc32k>;
+                       clock-names = "hosc", "losc";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               pio: pinctrl@1c20800 {
+                       compatible = "allwinner,sun50i-a64-pinctrl";
+                       reg = <0x01c20800 0x400>;
+                       interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_PIO>;
+                       gpio-controller;
+                       #gpio-cells = <3>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+
+                       i2c1_pins: i2c1_pins {
+                               pins = "PH2", "PH3";
+                               function = "i2c1";
+                       };
+
+                       uart0_pins_a: uart0@0 {
+                               pins = "PB8", "PB9";
+                               function = "uart0";
+                       };
+               };
+
+               uart0: serial@1c28000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28000 0x400>;
+                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART0>;
+                       resets = <&ccu RST_BUS_UART0>;
+                       status = "disabled";
+               };
+
+               uart1: serial@1c28400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28400 0x400>;
+                       interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART1>;
+                       resets = <&ccu RST_BUS_UART1>;
+                       status = "disabled";
+               };
+
+               uart2: serial@1c28800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28800 0x400>;
+                       interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART2>;
+                       resets = <&ccu RST_BUS_UART2>;
+                       status = "disabled";
+               };
+
+               uart3: serial@1c28c00 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28c00 0x400>;
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART3>;
+                       resets = <&ccu RST_BUS_UART3>;
+                       status = "disabled";
+               };
+
+               uart4: serial@1c29000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c29000 0x400>;
+                       interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART4>;
+                       resets = <&ccu RST_BUS_UART4>;
+                       status = "disabled";
+               };
+
+               i2c0: i2c@1c2ac00 {
+                       compatible = "allwinner,sun6i-a31-i2c";
+                       reg = <0x01c2ac00 0x400>;
+                       interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2C0>;
+                       resets = <&ccu RST_BUS_I2C0>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c1: i2c@1c2b000 {
+                       compatible = "allwinner,sun6i-a31-i2c";
+                       reg = <0x01c2b000 0x400>;
+                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2C1>;
+                       resets = <&ccu RST_BUS_I2C1>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c2: i2c@1c2b400 {
+                       compatible = "allwinner,sun6i-a31-i2c";
+                       reg = <0x01c2b400 0x400>;
+                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2C2>;
+                       resets = <&ccu RST_BUS_I2C2>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               gic: interrupt-controller@1c81000 {
+                       compatible = "arm,gic-400";
+                       reg = <0x01c81000 0x1000>,
+                             <0x01c82000 0x2000>,
+                             <0x01c84000 0x2000>,
+                             <0x01c86000 0x2000>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_HIGH)>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+               };
+
+               rtc: rtc@1f00000 {
+                       compatible = "allwinner,sun6i-a31-rtc";
+                       reg = <0x01f00000 0x54>;
+                       interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+               };
+       };
+};
-- 
git-series 0.8.11

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to